On the Fly: Putting on Waders

Prepare your boots and waders before putting them on.  Walking around on the neoprene feet of your waders looking for boots and other gear is a good way to damage them.  Have your boots ready to step into as soon as you slip on your waders and consider having a mat to stand on.  Also, tucking your pant legs into your socks ahead of time will prevent them from “riding up” your legs when you  put on your waders.

“On the Fly” is a feature in my monthly newsletter offering quick fly fishing tips to make your life on the water a little easier…

Fly Fishing Gear Maintenance

I recently saw a post on Facebook from a gentleman who had broken two fly rods on one trip. Another person commented about “having the record” for taking the most broken rods back to his local fly shop. They proceeded to boastfully go back and forth about this as if it was some sort of badge of honor. Accidents happen and rods do break from time to time, but I had guided one of these gentlemen and it was no secret why he had broken so many.

When we first met, I cringed as he pulled his rod from the trunk of his car. It was not in a tube and there were a variety of items piled on top of it. I’ve seen a lot of rods break over the years, but I’ve never seen a single one break while it was in the tube. If you knew him, it would come as no surprise that he forgot to bring a reel for the rod, so he ended up using one of mine.

When he caught his first fish, he removed the hook and literally threw the rod on a rocky bank about ten feet away in preparation for a photo.   I let it slide but when it happened again on the second fish, he got the “lecture.” Not only was he damaging the rod every time he did that but also the reel. Actually, he wasn’t doing the fly line any favors either!

Whether it’s cars, tools, fly fishing gear, or anything else, I was always taught that if you take care of your gear, your gear will take care of you. While taking care of your gear often means simply handling it responsibly in the field, simple maintenance out of the field can greatly extend the life of valuable fishing gear and insure that it’s ready to perform when you need it to. And what better time than winter for inspection and a little preventive maintenance?

Rods:

Fly rods don’t require a lot of maintenance. Basically, don’t heave them into rocks every time you catch a fish and keep them in a tube for storage and travel. However, be careful not to store them wet for an extended amount of time in an airtight tube. Simple off-season maintenance includes checking rod guides and wraps for any damage. If you notice a loose guide or a wrap beginning to fail, you can send it back to the manufacturer for a preventive repair, rather than waiting for the guide to come off while you’re fishing. When you are doing this, also check the ferrules (where the rod pieces join) for a good, snug fit. If any seem loose, apply a small coating of wax to the male end.

Reel Lube

Reels:  Fly reels are pretty low maintenance, too. First, check to make sure the reel is turning smoothly. If it’s not, be sure that there’s not too much line on it. If there’s not excessive line preventing it from turning smoothly, you likely have a bent frame or dented spool. If it’s minor, your local fly shop might be able to fix that. Otherwise, it will need to go back to the manufacturer.

Assuming the reel is turning properly, all it really needs is a cleaning and “tune-up.” Remove the spool and rinse it and the frame with water. Wipe away any excessive grime build-up and apply a small amount of reel lube around the gears. Allow the reel to dry before putting back into storage.

Fly Line Dressing

Fly Lines:  Fly lines probably require more maintenance than any other piece of equipment. You don’t have to completely remove it from the reel, but pull out at least the first forty feet of fly line. You can pull out the entire amount if you wish, but most people don’t use more than the first forty feet and it’s what will need the most attention.

Spread it out someplace other than the ground, such as between a couple of trees in the back yard. Take a small container and fill it with water and a couple drops of dishwashing liquid. Dip a clean cloth or paper towel in the liquid and run the cloth back and forth over the fly line. You’ll likely see a dark, grimy stain on the cloth after you do. Repeat this process with a clean cloth until you no longer see a stain, then do it one more time with just water and no soap.

Now that your line is clean, you’ll want to treat it with something to keep it slick and prevent cracking. There are specific fly line treatments available at fly shops for this. Just rub into the line using the same method described above. Or something I like to use is ArmorAll. You buy the wipes and simply run the wipe up and down the line several times.

These steps should keep your line floating better, allow it to shoot through the rod guides better, and simply make it last longer. It wouldn’t hurt to do this periodically throughout the year, but at least once a year. It depends on how much you fish and where you fish. Fly lines used on scummy lakes and ponds will need more frequent attention than lines used in clear mountain streams.

Waders:  Most wader care needs to happen throughout the season and that mostly involves being careful of thorns, etc. Probably the most damage occurs to waders when people are putting them on or taking them off at the truck. I regularly see fishermen put on their stockingfoot waders and then walk around looking for the boots or other items. This is just an invitation for gravel or other pointy objects to puncture the feet of the waders. The feet of my waders never touch the ground – boots are on the ground ready, foot goes into wader, wader goes into boot. If you’re not comfortable doing the “one leg hop,” keeping a mat to stand on is a great idea.

Also be sure not to store waders wet. Hang them to dry when you get home, preferably not in direct sunlight. Occasionally washing them through the year will help with their breathability and water repellency. Wash them on gentle cycle with a mild detergent. I recommend Ivory Snow, a detergent commonly used for baby clothing.

Winter is a great time to repair any leaks and/or treat with DWR. If you have major punctures or tears in your waders, you’re probably better off sending them to the manufacturer for repair or replacement. But most folks just encounter minor leakage caused by a pinhole or seam leak, and that’s pretty easy to fix yourself.

First, try to narrow down the location of the leak. For instance, if you’ve been getting damp on the inside of your right leg from the knee down, chances are pretty good that the leak is somewhere around the inside right knee. Sticking with that example, make sure the waders are completely dry, turn them inside out, and generously spray rubbing alcohol all around the suspected leak area. Still keeping the waders inside out, fill the right leg past the knee with water and look closely in the area where you sprayed the alcohol. You should see discoloration where the leak is. Mark that spot with a permanent marker.

Now that we know where the leak is, it’s time to repair. Again, allow the waders to dry completely. Where you made the mark with the marker, liberally smear Aquaseal on the area. Aquaseal is available at most fly shops and many camping/outdoor stores, and often, a small tube of it comes with your waders. Put the treated area of the waders in direct sunlight to cure. When the Aquaseal feels “solid,” the waders should be immediately ready to go. However, I’d move them inside to a dry place and wait 24 hours before using.

Treating your breathable waders with a DWR is a great winter project. As a matter of fact, if you have a breathable rain jacket, grab it and treat it at the same time.   DWR (Durable Water Repellant) is basically going to allow the water to “bead” and roll off the fabric rather than absorb into it. I’ve had old waders and jackets that I never treated that, even though they were still waterproof, were absorbing so much water that they felt heavy and even clammy. DWR is good stuff. There are a few brands out there and can usually be found at camping/outdoor stores. I’ve personally had good luck with ReviveX Spray-on Repellant.

Start by washing the waders and/or jacket with a mild detergent as described above. Hang the garment(s) and spray evenly and thoroughly with DWR while the garment is still wet. I usually apply a little heavier around seams and stress areas such as the knees and crotch area on waders. On jackets, I put a little more emphasis on the shoulder area. You can then simply allow it to air dry where it’s hanging or put it in the dryer on low/medium for about an hour.

That about covers the big stuff. I also like to use winter to go through fly boxes and remove rusty hooks. Those have a way of contaminating the entire box after a while. And it’s a great time to go through your first aid kit and make sure everything is up to date, put new batteries in the flashlight, etc. Then, when spring rolls around, all you have to do is fish!

Dressing for Winter Fishing

The arrival of November usually means cold weather is not too far off, but it doesn’t mean that you have to quit fishing. Certainly the fishing for wild, mountain trout can slow down significantly as water temperatures fall, but tailwater trout and really any stocked trout will continue to feed well, even in the coldest of temperatures. In recent years, winter guide trips to Delayed Harvest streams have become a favorite of many clients, mainly because of the potential for really big trout.

In East Tennessee, the average winter day is not unbearably cold – at least not compared to many other places in the U.S. The coldest month of the year here is January where, in towns like Knoxville and Maryville, the average high is 46-degrees and the average low is 29-degrees. However, this is deceiving in a couple of ways. When most folks view this forecast, they don’t take into consideration that you’re only going to experience that high temperature for a couple hours out of the day. Additionally, in the case of Delayed Harvest waters, we’re usually fishing mountainous areas where there’s a little more elevation and the sun spends a lot of the day low and behind the ridgeline. In other words, you can easily shave another 5-degrees off those highs and lows and when you throw in a little wind, you’ve got a pretty darn cold day on the water.

So, a typical full day trip in the winter will go from about 9 to 5. If the forecast is for a high of 46-degrees, that will be more like 40-degrees on the stream, and you’ll reach that high temperature probably around 3pm. That means for the majority of the day, you’ll be fishing in temperatures in the 30’s. Unless you grew up someplace like Alaska, North Dakota, or Maine, that’s cold! Don’t get me wrong, it can be a ton of fun and it never feels as cold when the fish are biting, but to better enjoy your day on the water, you better know how to dress. Below are a few tips to prepare for a winter fly fishing trip.

  • Dress in Layers: You hear this advice a lot from the weather person on your local news but I don’t think they usually understand the difference in dressing in layers and simply dressing warm. If I’m just going out in the cold for a while, I can just throw on a heavy coat and a hat and be set. However, when I’m going to spend the day outside in the cold, I’m likely to experience a variety of changing temperatures and conditions. Dressing in layers allows me the flexibility of adding or removing layers as conditions and activity levels change.

 

  • How to Layer: There are three basic layers to consider. The first are the
    Long underwear with turtleneck top

    garments closest to your body, and their main objective should be to wick moisture from your body. If your body gets wet, from perspiration or anything else, you’re going to be cold, no matter what you’re wearing as an outer layer. Consider wearing a thin, synthetic “liner sock” on your feet and synthetic long underwear for your legs, arms and torso. Long underwear with a turtleneck top is a bonus as it gives an added layer on your neck.

The next layer is the insulating layer that is designed to keep you warm. Depending on how cold it is, this could actually consist of multiple layers. For the feet, a thick, heavy wool or fleece sock should be sufficient. The 3mm neoprene foot on the wader is also going to serve as insulation. For the legs, a fleece pant designed for cold wading is great and I also like traditional fleece lined pants. Up top, I typically wear a mid-weight fleece pullover followed by a heavier fleece pullover or jacket. As the day warms, I might remove the heavier fleece. Again, it’s a bonus if one or both of these upper layers covers the neck.

The third and final layer is the shell. Its purpose is to protect from wind and moisture. For your lower half, the waders serve as your shell. Up top, I just add a light to mid-weight rain jacket. The hood will act as a shell layer for your head.

  • The Extremities: By extremities, I’m mostly talking about your head and your hands. These can be the most challenging and most important to protect. The challenge with the head is to keep it warm without interfering too much with necessary senses like sight and sound. For that reason, I HATE wearing a hood, though sometimes it’s necessary on rainy days.
Under Armour Infrared Hood

I layer my head with a product from Under Armour called an infrared hood. It’s the same thin-layered garment you see football quarterbacks wearing under their helmets in cold weather games. It covers the entire head, including the ears, but doesn’t interfere with hearing like earmuffs do. It also has a piece that can be pulled up to cover the face on particularly cold, windy days. Because it is relatively thin, I can wear a traditional ball cap over it on milder days or a warm stocking cap on colder days. This is one of the best pieces of cold weather fishing gear I’ve found!

Fold-back Fingerless Mittens

The hands and fingers are the toughest part. Trying to keep warm while maintaining the necessary finger dexterity for fly fishing is one that I haven’t totally figured out. While there are fleece gloves and mitts with fold-back hand and finger pieces, they still leave your fingers exposed while fishing and the fold-back piece is just one more thing for your fly line to hang on. I prefer just standard wool or fleece fingerless gloves. They keep my hands warm and if the fingers start getting too cold, I take a break and put my hands in my pockets.

  • Adjusting Layers: Most of this is common sense. If you’re cold, add a layer. But it’s important to pay attention to your activity level because you don’t want to be too insulated while active and start to perspire. Perspiration during cold weather, once you become less active, can create a cold that’s hard to come back from and it’s a common cause of hypothermia when not addressed.

One of the biggest mistakes I see people make is overdressing for the car ride to the stream. Wearing too much in the car can cause you to perspire, particularly your feet, and you’re going to be cold all day. Wear the bare minimum of layers in the car, from head to toe, and add the additional layers when you reach the stream.

  • Fabrics: You may have noticed repeated references to fleece or synthetic fabrics. That’s a really important piece of the puzzle for staying warm, dry, and comfortable. Synthetic materials like fleece are not only more breathable, but offer insulating properties even when wet. Wool does the same thing though it is often heavier. This is important with all of your clothing in case you take a dunk in the stream, but it is particularly important with your gloves, as your hands will constantly be exposed to water while fishing.

Winter Fishing in the Mountains

We’ve talked a lot about water temperature in many of these articles and for good reason. Things like approach, presentation, and fly selection can determine whether or not a fish will take your offering, but water temperature can determine whether or not a fish will take any offering! You can read in more detail about water temperature in A Matter of Degrees, but to keep it simple here, wild trout in the Smokies just don’t do a lot of feeding when the water temperature is in the 30’s and low 40’s.

Tailwaters are different because the water comes from the deep, insulated layer of a lake, and the water temperature remains relatively constant, regardless of air temperature. Stocked trout in a freestone stream are different because, well, they just don’t know any better. They were raised in hatcheries and were fed the same amount of food every day, regardless of temperature. But wild trout in freestone streams have never had that luxury, and in order to survive, their metabolism changes and they become nearly dormant. This doesn’t mean that they won’t feed at all but if you’re going to fish the Smokies in the winter, come prepared with a great deal of patience.

I spend more time looking this time of year than I do actually fishing. Blind fishing a run in the spring can be very productive because all or most of the fish should be feeding and they’ll often move up and down and side to side for food. In the winter they typically won’t move much for food and you need to put the fly right on their nose. To do this most effectively, you really need to see the fish. Take your time and watch the water, paying particular attention to the slower currents on the edges and lower parts of a run. Ideally, you want to locate fish that are up in the water column rather than hugging the bottom. Fish that are up a little in the column are more likely to be feeding.

If you can’t actually see the fish, look for flashes on the bottom. Any fish that is feeding will likely be picking nymphs off the bottom. When a trout eats a nymph off the bottom, they usually “tilt” their bodies sideways and you’ll see the flash of their lighter colored bellies. You may have to scope out several pools or runs before you see fish or fish activity. Experience will teach you the kind of water to focus on, but deeper, slower runs will usually produce better than fast riffles and pocket water this time of year. And try to pick the warmest part of the day, probably late morning to late afternoon.

Once you think you’ve located feeding fish, it’s time to think about fly selection. On warmer winter days, you may actually see some insects hatching. If you do, they’re likely to be small and dark: Blue Wing Olive mayflies, small black stoneflies or caddis, dark olive or black midges… Rarely anything bigger than a #18. On rare occasions, you may see fish feeding on the surface during one of these hatches. Small Parachute Adams or Griffith’s Gnats are a pretty good bet in those instances. Mostly though, they’re going to feed more on the nymphs, so black Zebra Midges, small Pheasant Tails, and small black or olive Hare’s Ears will be pretty good bets.

If I don’t see any kind of hatch, I may still try one of the above mentioned nymphs, but more likely I’m going with something big, like a stonefly nymph. It may be more psychological, but I feel like I’ll more likely get that lethargic fish to eat if I show him a bigger mouthful. Girdle Bugs, black Wooly Buggers, Yuk Bugs, and Bitch Creek Nymphs in sizes #10 – # 4 are personal favorites.

Girdle Bugs

Regardless of your nymph selection, you’re going to want it to drift as slowly and as near the bottom as possible. I like to use heavy flies and I like to use split shot. Take your time and adjust your weight regularly as you move to areas with different depths and current speeds. If you’re not hanging up on the bottom from time to time, you’re not deep enough. If you’re hanging the bottom every time, you’re too deep. Take the time to get it right. That fly needs to be right in their nose!

Adjusting your strike indicator (if you’re using one) can help too, but usually the answer is more weight. Most fishermen just don’t have their nymphs deep enough in the winter. A great way to learn about the effects of different current speeds vs. the amount of weight on your line is to spend some time fishing a fly you can see under water.  For instance, tie on a bright pink egg and watch how deep it sinks, how fast it sinks, and how it drifts with no weight, then 1 spit shot, then 2 split shot, etc. Try it with a strike indicator and without to learn how the indicator can impact the drift, too. This is just a great way in general to better understand nymphing, and sometimes you’ll even catch a fish on that trashy pink egg!

Again, don’t expect near the number of strikes that you might in spring. But if you’re just itching to get out of the house and are willing to be patient, you might just be surprised at what you find.

Tips for Warm Weather Wading

June is here and that means things begin to make another seasonal change here in the mountains.  I always look forward to warmer weather because I get to shed the waders and enjoy the feel of cool mountain stream water on my legs and feet. I also enjoy the freedom of movement I have without waders.  But the absence of waders also exposes you to a few more risks.

Mountain fishing involves moving.  You move through the water, you move over boulders and you move through the woods where you encounter sharp sticks, prickly bushes and undergrowth, poison ivy, and a variety of critters.  For these reasons, I always encourage people not to wear shorts when wet wading.  A pair of long, synthetic “quick-dry” pants will provide you the same level of comfort while still giving your legs much needed protection.

Wading boots are also a must.  I frequently see fishermen attempting to wet wade in Chacos or some other type of river sandals, and I cringe every time I do.  A good pair of wading boots will not only provide you with the much-needed traction of felt soles (or Vibram), but will also offer ankle support and toe protection.  You will definitely want both when navigating the rocky bottoms found in all mountain streams.

If you already have waders and boots, note that the boots are oversized to fit over the 3mm neoprene foot of the wader. Consider purchasing a pair of neoprene socks for wet wading.  These will not only make your boots fit, they will provide a layer of padding and insulation.

Great Northern Water Snake

Critters are another thing to be aware of when fishing in the summer months.  Snakes are the biggest concern for most people but they aren’t much of an issue. While we do have two poisonous snakes in the Smokies, Copperheads and Timber Rattlesnakes, most of the snakes encountered by fishermen are harmless water snakes.  I spend nearly 200 days a year in the park and probably see one or two poisonous snakes a year.  The Great Northern Water Snake is a fairly large water snake that is often mistaken for a Cottonmouth, a species we do not have in the Smokies.

Senseless

On a guide trip this spring, I came across a dead rattlesnake at the edge of the stream.  Someone had obviously bashed its head in with a rock.  There is absolutely no reason for this, and in the national park (and I believe the state of Tennesse), it is illegal.  If you encounter a snake, poisonous or otherwise, just leave it alone and move on.  They don’t want anything to do with you either.

What I try to keep an eye out for more than anything else, especially during the summer months, are hornet nests.  They love to build these things on low branches above streams.  If you see one, steer clear and move on to the next hole.  And when you do, make sure it is still well out of range of your back cast.  Hooking a hornet nest can ruin your day in a hurry.

Hornet Nest

If you do accidentally get too close and get stung, DO NOT start swatting!  This triggers a pheromone that signals all other hornets in the area and one or two stings can turn into dozens.  Just get far away from the nest as quickly as possible.

Yellow Jackets are also common in the Smokies and typically build their nests in the ground.  As with snakes, your best solution here is just to pay attention and watch where you are stepping.  Of course, if you are allergic to either of these, come prepared with an EpiPen or other treatment.  If you’re not allergic, most stings can be easily treated by immediately and thoroughly rinsing the area.  Applying an anti-itch medication will also provide relief.

Mosquitoes, noseeums, and other biting insects are not a huge problem when you’re on the stream but can be as soon as you step away from the stream in the woods or on the trail.  On the stream, you’ll mostly just be harassed by gnats that don’t bite, but love to hover around your face and get in your eyes.

The best prevention for all of these, of course, is good old-fashion bug spray.  Bug sprays with higher concentrations of Deet seem to be most effective, but be careful when using them.  Deet has the ability to melt plastic, and getting a healthy dose of Deet heavy bug spray on your fingers can wreck a fly line.  Just avoid spraying it on your palms and finger tips.  If you’re one who likes to spray your hands and rub it on your face, just spray the back of your hands and rub it in that way.

 

Of course, anytime you’re maneuvering through the woods, there’s a chance of picking up a tick.  Deet based bug sprays will help with that, too.  I still try to check myself periodically, particularly at the end of the day.  If you do find one on you, there’s an easy way to remove it.  Squeeze a dab of medicated lip balm (the gel type that comes in the squeeze tube) onto your finger and smear it on the tick.  It will immediately release itself from your skin. Cool, huh?!?  I always keep a tube of Carmex in my first aid kit for this reason.

Skills: 10 Tips for Fishing Small Streams

As many of you know, I spend nearly 200 days a year fishing and guiding on small mountain streams in the Smoky Mountains where creel surveys indicate that approximately 90% of (unguided) fishermen never catch a fish. Meanwhile, the 10% who do catch fish tend to catch A LOT of them. When fishing small streams, it’s a fine line between getting skunked and catching 50, and most of the time, the difference isn’t what’s in your fly box. In the Smokies and other similar small mountain streams, approach and presentation is the name of the game and to have success, you may need to adjust a few of your techniques. Listed below are 10 tips that may make your next small stream fishing trip more productive.

Dress for Success: As simple as it sounds, one of the biggest keys to being successful is not spooking the fish. There are a number of ways you can spook a trout but it all starts with what you wear. Leave the coral casting shirts at home. Instead, dress in earth tones like olive, tan, and grey. You don’t need to be a fly fishing commando with face paint and twigs in your hat but you do need to blend in.

This doesn’t matter as much on big, open rivers because you’re usually casting farther and your backdrop is the sky. On small mountain streams, you’re closer to the fish and your backdrop is usually trees, bushes, and rocks. Brighter colors stand out against that backdrop and allow the trout to more easily detect your movement.

Wade Quietly: Think Great Blue Heron and not Labrador Retriever when you’re moving through the stream. Step slowly, quietly, and try not to drag your legs through the water. Again, you’re closer to the fish in these streams and the fish are going to be sensitive to splashes and rocks scraping together. For this same reason, I don’t encourage wearing studded wading boots on these streams.

Move Upstream: Trout are going to be facing upstream watching a current for food. By moving upstream, you will be staying behind the fish making it more difficult for it to detect you.

Use Things Like Boulders to Hide Behind

Stay Low: A trout has a cone of vision that allows it to see things above it. The closer and higher up you are, the more the fish will be able to visually detect your movements. As before, you don’t have to be a fly fishing commando and belly crawl from spot to spot. Just try to crouch more when approaching a run and take advantage of natural barriers. For example, if there’s a boulder in the water, stay behind it rather than standing on it.

Read the Water: Trout won’t be just anywhere in the stream. Aimlessly casting your fly around the creek is not only unproductive, you risk spooking the good spots by throwing your line across them. Most of what you’ll find in small mountain streams is pocket water, which is just faster water interspersed with large rocks. Almost everywhere a current breaks over or around a rock creates a holding area for a trout, usually on the edges of the current and directly above and below the rock.

Look Before You Leap

Reading water becomes very instinctive with a little experience, but at first, you’ll have to think about it a little more. Look at each spot you’re approaching and consider that trout need three basic things: food, cover, and comfort. Food is typically going to be concentrated more in the currents rather than in still water. Cover is typically going to be found in deeper water and/or under things like rocks. Comfort is going to be found in places that don’t stress the fish, like slower currents rather than turbulent white water, or shade rather than sun on a bright, warm day.

Position First, Cast Second: Making a good presentation is the other biggest key to success on small streams, and one of the most challenging. Many anglers mistakenly stay too far back from their target and cast way too much line. In smaller mountain streams, you typically have a fairly large volume of water moving downhill through a narrow area. Everyplace the water breaks around a rock creates a velocity change, resulting in dozens of different current speeds. Making long casts puts line across all of these currents and creates drag on the fly. Drag on the fly means you don’t catch fish.

Attempting to overcome this exclusively by mending line is often impractical not only because of the numerous varied currents, but you simply don’t have time to do that much mending when casting to such small target areas. Your best course of action in pocket water is usually to get closer to the target where you can keep most of the line and leader off the water, often eliminating the need to mend altogether. At the very least, it will be easier to mend a short length of line on one current than a long length of line on five currents.

To get closer and keep from spooking fish, the idea is to keep something between you and the fish, like a boulder or simply a fast current. If you want to drift a fly on the inside edge of a current, you’re going to approach from the lower outside of the current, using that current to conceal you from the fish on the other side. Try to get close enough to use the length of your arm and rod to reach across the current and keep line completely off of the faster water. A longer rod will be beneficial because it’s going to give you more reach, allowing you to stay back a little farther. Of course, utilizing steps 1-4 are critical to making this work.

As you move up the stream, you’re constantly repositioning yourself for the next spot. Sometimes you’re repositioning yourself within the same pocket by fishing the near current first, moving closer, then fishing the far current. Remember, it has nothing to do with how far you can cast. Rather, it’s where you need to be to control line for the best drift. In pocket water, I’d estimate that 80% of the fish I catch are with less than 4’ of fly line past the rod tip.

When you come to a bigger, slower pool, you may not be able to get as close because you don’t have the faster currents to hide you. You also don’t have the faster currents to screw up your drift. Stay back and make slightly longer casts here. Just be careful not to make long casts to the head of the pool before fishing the tail or you can spook half the fish by lining them. Everything gets broken into pieces here. Whatever you’re going to spook first, fish first.

Minimize False Casting: Or just don’t do it at all. Most of the time when fishing small streams, you’re making very short casts, and in pocket water you’re often using a fixed amount of line. Repeated false casting is unnecessary and is movement above the fish. Wild mountain trout are in the middle of the food chain and they typically associate movement above them with a kingfisher or heron swooping down to eat them.

Position Carefully and Use a Longer Rod for Reach

Use a Longer Rod: There’s a common misconception that you need to have a short rod to fish small streams to stay out of the trees. Again, the idea here is not to make the longest cast possible up the stream without hanging a tree limb. You want to move closer, make short casts, and reach to keep line off of currents. A longer rod will better allow you to do that and I like to fish as long a rod as I can get away with. In the tiniest, rhododendron-choked mountain streams, that may only be 7’, but for typical mountain streams in the Smokies, it’s 8 ½’ – 9’. And yes, even longer tenkara rods can be highly effective for fishing this type of water.

Accuracy is Everything: All of the best small stream fly fishermen I can think of have two things in common. They know exactly where to position themselves before making a cast, and they are great casters. Unfortunately, great casting is often associated with double-hauling 110’ of line, and that’s hardly what I’m talking about. These fishermen aren’t making long casts, but can put the fly exactly where they want it the first time, the second time, and every time. In pocket water, if your first two casts are off target and/or drag a little bit, you still might catch a fish on the third cast, but you’ve probably already spooked the big fish of the hole.

If you’re not one to practice casting in the backyard, you should be. If you are, don’t just try to cast it as far as you can. Instead, practice with 20’ of line and less and try to hit a small target. Try to do it with an overhead cast off both sides of your body. Try to do it side arm. Try to do it with a roll or circle cast. You’ll find that the more you practice off the water, the “luckier” you’ll be on the water.

Keep Moving: In small streams, especially in pocket water, you’re going to catch more fish by covering more stream. Identify the likely spots in a pocket or run, put a half dozen drifts in each spot and catch your fish. If you miss a couple of strikes, put a few more drifts through and move on. If you don’t get a strike, don’t spend an hour there changing flies until you do. Move on. This doesn’t mean speed fish the stream, as you still need to be methodical in your approach. But when you get good at reading water, positioning and casting accuracy, you’ll be able to cover the water quickly and efficiently.

Dressing For Success

One of the Easiest Ways to Catch More Trout in the Smokies….

I recently guided a husband and wife on a small brook trout stream in the Smokies. The stream, like most in the Smokies, consisted of a lot of pocket water, which meant getting closer to the fish. Both were novice fly fishers and their skills improved steadily as the day went on. As a matter of fact, their skills were about equal, but as the day progressed the wife was getting 5 or 6 strikes for every 1 strike the husband got.

 

We were moving up the stream together and they were taking turns fishing. They were fishing the same fly. And as mentioned before, their casting ability, approach, and presentation was nearly identical. What was different, you ask? The wife was wearing a drab green shirt and the husband’s shirt was bright red. Simple as that.

 

Look how this white shirt stands out

Casting can be challenging. Getting good drifts can be challenging. Figuring out what the fish are eating can be challenging. But dressing appropriately is one of the easiest things to control and can greatly improve your success on the stream.

 

Now look how well this fisherman blends in

Years ago, three seasoned fishermen from Montana walked into Little River Outfitters frustrated that they had fished two days without catching a fish. One was wearing a bright blue shirt, another was wearing a white shirt, and the other’s shirt was bright coral color. My good friend, Walter Babb, was sitting in the shop and without pulling any punches, said, “Well, those fish saw you guys get out of the car!”

When the fishermen pointed out that they wore the same clothing in Montana and caught plenty of fish, Walter went on to explain that in big western rivers, your background is the sky. Here it’s the trees and bushes.

This is a bit extreme!

You don’t have to be a fly fishing commando decked out in camouflage and twigs in your hat to catch fish in small mountain streams, but dressing in earth-tone colors does make a huge difference. Think drab greens, browns, tans, and greys when you dress for a day on the water. While bright white t-shirts and orange Tennessee ball caps may be appropriate for game day at Neyland Stadium, they are doing you no favors on the trout stream.

 

What about strike indicators? They’re bright and colorful. Don’t they spook fish? Sometimes they do, but usually for different reasons. It’s not really the bright color that spooks fish; it’s movement. These are wild trout in the Smokies and they’re right in the middle of the food chain. Any kind of movement, particularly above them, often means a kingfisher or heron is about to swoop down and eat them! The less you blend in to your background, the more pronounced your silhouette is, and the more noticeable your movements are.

The cone

All of this becomes more and more important the closer you have to get to the fish, even when you’re behind them. Trout actually have a “cone of vision” above them that even extends a little bit behind them. The closer you get and the higher up you are, the more you will be detected in that cone. So in addition to what you wear, think about how you move through the water to reduce the chances of spooking fish. Move slowly and quietly. Stay low, particularly when fishing in close quarters. See that big boulder in the stream? Don’t fish from on top of it. Stand behind it.

 

Finally, keep your false casting to a minimum. Fly lines are often brighter colors so that you can see them in order to mend and achieve good drifts. Remember, it’s not the color so much as the movement. Repeatedly false casting a fly line over a trout’s head is excessive movement in that cone of vision and will send him under a rock.