Matching the Hatch

Probably 20 years ago, I was fishing the Clinch River with a buddy during the sulfur hatch. I won’t get into what has happened to that hatch, but back then, it was epic. Sulfurs would come off by the thousands for 4-6 hours a day for about 3 months. We would drive down from Kentucky to fish it and on most trips, we would both steadily catch fish, many topping 20”.

On this particular trip, the bugs were coming off as good as they ever had, the water was boiling with rises, but we were both getting blanked! We were both going through every type of sulfur dry, emerger, and nymph in the box, all with the same result. Frustration got the best of both of us and we headed to the bank for a smoke, a bad habit we both enjoyed back then. While staring at the river and scratching our heads, it hit us both at the same time as we simultaneously exclaimed, “They’re eating caddis!”

Caddisflies tend to emerge quickly and almost explode off the water. When a trout feeds on one, it will frequently chase it to the top to eat it before it gets away. Sometimes the momentum will cause the fish to come completely out of the water, but at the least, results in a very distinct, splashy rise – not like the delicate sipping rise to a mayfly. Once we stepped away from the river and watched, we both noticed it.

We went back to the water and began looking more closely. Sure enough, there were caddis hatching, too. There was probably one caddis hatching for every 100 sulfurs, but for whatever reason, the trout were keyed in on the caddis. It’s what is referred to as a “masking hatch.” We both switched to the appropriate caddis pattern and were immediately into fish!

That’s not the only time something like that has happened, and each occurrence has trained me to always pay attention and sometimes try to look past the obvious. Here are a few things I’ve learned along the way that may help you solve a hatch riddle sometime.

First, we have to address the basics. If you see fish rising and have a pretty good idea what they’re eating but you’re fly is being ignored, check to see that your fly is the same size as the naturals. Also be certain that your tippet is not too large and that you’re getting a good drift. Presentation is most often the culprit when your fly is being ignored. Next, make certain that the color is a close match to the natural. If you’re fishing a bushy pattern, you might try a more subtle pattern like a Comparadun. If that’s not working, try an emerger fished just under the surface or in the film.

Fish Rise

Still not catching them? Take a break and watch the water. You may be able to tell something from the rise rings as I described above. If you don’t learn anything from that, try to find a fish that is rising steadily and watch him. He’s probably feeding in rhythm, like every 10 seconds. Watch his spot and try to time his rises. When you have that down pretty close, try to see what he eats. You should be able to tell if it’s the same kind of bug you’re seeing in the air, or at the very least, whether he’s eating something on or just below the surface. It’s almost like detective work. You sometimes have to go through the process of eliminating suspects before you can zero in on your man!

If fish are actively rising but you don’t see any bugs in the air, check the water. Try to position yourself at the bottom of a feeding lane (downstream of where the fish are feeding) and watch the surface of the water (and just beneath) for drifting bugs. Holding a fine mesh net in the current is a great way to collect what’s coming down the channel, but if you don’t have one, your eyeballs will do just fine. If you see some insects, capture one and try to match it with a fly pattern.

Hatches are puzzles and that’s one of the things that makes them fun. Sometimes you solve it right away, sometimes it takes awhile. Just remember that while the fly pattern is a big part of the equation, it’s not the only one. As mentioned above, presentation is huge. In addition to your technique, a smaller tippet and/or a longer overall leader may be the solution. Also consider your approach.

While I typically like to cast upstream to fish so that I can stay behind them, they will sometimes shy away from your fly in slow runs if they see your line or leader. I will sometimes try to get above fish in slow runs and cast down to them so they are sure to see the fly first. You have to land your cast short of them with slack in the line, and feed slack to enable the fly to naturally drift to them. This is a challenging presentation and it is critical that you carefully position yourself out of the trout’s line of vision.
Again, it’s a puzzle and there’s not one universal solution to every challenge.

Pay attention to your technique and everything what you’re doing (or not doing). Most important, pay attention to the fish. They’ll usually tell you what to do!

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Stream Etiquette

When I first started fly fishing, it was a different time. It was before everyone had access to the Internet. There were no message boards. There was no Twitter. There was no Facebook. Many fisheries didn’t receive nearly as much pressure simply because not nearly as many people knew about them. And to the fishermen who did know about them, they were closely guarded secrets shared only with a handful of trusted friends.

I realized that early on and I respected it. I learned quickly that I not only needed to learn and develop a set of skills to be able to catch fish, but I also needed to conduct myself in a certain way to earn the trust and respect of fishermen who had been doing this a lot longer than me. Part of this simply meant knowing how to keep your mouth shut when someone did share a particular fishing spot, but it also meant not behaving like an inconsiderate moron when you were on the stream.

The current trend of photographing and videoing every single fishing trip and sharing it, complete with GPS coordinates, on multiple social media outlets is probably the subject of an entirely different article. But regardless of how you feel about the trend, it has most certainly resulted in a lot more fishermen on more remote streams. And with easier access to this information, many of these “newer” fishermen have never been exposed to the idea of stream etiquette. While some folks are always going to be inconsiderate no matter what, I believe most violations of etiquette occur simply because someone doesn’t know better. Since it is just as important now as ever, if not more so, I thought this would be a good place to share a few basics.

Stream etiquette really just boils down to common courtesy and common sense. The first thing to keep in mind is that you are not entitled to any piece of water. If you have a favorite pool or stretch of water and someone is fishing it when you arrive, get over it, move on, and fish it next time – maybe get there earlier. Even if that someone is not in the pool but they are approaching it, don’t try to rush up and cut them off. Particularly in smaller mountain streams, fishermen don’t typically stay in one spot for long periods of time. Rather, they move up the stream covering stretches. The assumption should always be that the fisherman is working upstream and plenty of space should be allowed for that.

The appropriate amount of space to give another fisherman is always up for debate. On a crowded tailwater with limited walk-in access, that space might be 100 yards. On a somewhat crowded roadside river in the mountains, that space may be a quarter of a mile. On a backcountry stream where there are very few fishermen, that space may be a half mile to a mile. You kind of have to get a feel for the traffic flow and act accordingly. I always think of it like a movie theater. If it’s opening night for ‘Star Wars’ and the theater is packed, you’ll likely be sitting right next to someone else. If there are only two other people in a movie theater and you sit right next one of them, you’re being an ass.

When in doubt, communication is always the best way to ensure everyone has a positive experience. “How far up are you planning to fish?” Most fishermen appreciate this and will typically extend the same courtesy. Typically. On one occasion when guiding a couple of fishermen on Little River, we found ourselves walking up the trail alongside two other fishermen. Since we were already a couple of miles up the trail and obviously heading in the same direction, I made conversation with them and asked how far up they were planning to go. In a gruff tone, one of them replied, “Farther than you!”

If I had been by myself I might have hiked all the way to the stream’s headwaters purely out of spite! Instead, I politely explained that I just didn’t want to get in each other’s way. By being so obtuse, he was sabotaging an easy way of accomplishing what we both wanted to accomplish. Most fly fishermen, particularly in the backcountry, are nice folks and they’re in the backcountry for the same reason you are: to get off by themselves. Usually, there is plenty of water for everyone and being willing to communicate will help ensure that everyone gets what they want. Be nice!

And if you make a mistake, apologize and move on. There have been plenty of times when I inadvertently cut someone off in a stream because I didn’t see them. It happens to all of us. If you’re close enough, apologize and move on to another area. If you’re far away, wave and move on to another area. If someone inadvertently cuts you off and acknowledges it with a wave or an apology, cut them some slack. Mistakes happen. Be nice!

This is a trend that has gotten WAY out of hand

Finally, stream etiquette includes blending in with your environment. Don’t take away from someone else’s current experience by making a lot of commotion like shouting up and down the river. And don’t take away from someone’s future experience by altering the landscape. This most definitely means don’t leave any garbage behind, but it also means don’t litter the landscape with “sculptures” made of sticks and stacked stones.

Again, as mentioned earlier, this all pretty much boils down to common sense and common courtesy. Unfortunately, both seem to be in short supply these days.

Setting the Hook

If you’ve ever spent anytime fishing in the Smokies, you have missed plenty of strikes. And if you’ve ever been fishing with me in the Smokies, you’ve no doubt heard me say that no matter how good you are and how often you fish, you’re going to miss strikes from these fish. I’d say that’s true most anywhere, but in the Smokies, it’s a guarantee. I’ve had the pleasure of fishing for trout all over the United States and I am yet to find trout anywhere that hit and spit a fly quicker than they do in the Smokies! But while nobody is going to hook them all, there are plenty of things you can do to increase the number of fish you hook.

Before we get into those things, let’s first talk about what exactly is going on when a trout hits your fly. I once guided a gentleman who was having an excellent day as far as activity goes, but he was missing A LOT of strikes. I was giving him plenty of tips along the way but midway through the day, I realized we just weren’t on the same page when, after missing another strike, he commented, “I don’t know how trout even survive.”

“What do you mean,” I asked.

He replied, “It seems like it would be hard for them to survive when they miss their food so often.”

I asked more emphatically this time, “What are you talking about?!?”

He said, “As often as they miss the fly, you know they’ve got to be missing the real food, too.”

I exclaimed, “They’re not missing. You are!”

Don’t get me wrong. I have missed plenty of strikes in my years of fly fishing. Like I said, we all do, but it’s always been my fault, not the trout’s! Sure, every now and then a fish will “short strike” the fly or bump it with his nose, but for most anglers, that is very much the exception.  Even when that is the case, it’s probably still your fault. If you’re getting short strikes, it’s probably because your fly is too big, or your tippet is too big, or you have drag… Again, all of those things happen to everyone, but blaming the fish will never fix any of them!

So, what actually happens when a fish hits your fly? It depends on the kind of fly you’re fishing. When you are fishing a streamer (a fly that imitates a baitfish or something else that swims), you are usually stripping it and keeping a tight line. Typically, the trout will chase and/or ambush something they think is a wounded or fleeing baitfish. The strike will usually be rather aggressive and because you have a tight line, you will feel the strike. When you’re swinging wet flies or straight-line nymphing, you usually feel the strike as well, but it’s usually more subtle than the often violent strike that comes on a streamer.

But most of the time on a trout stream, most fly fishermen are imitating aquatic insects that are drifting in the water column. Whether adults on the surface or nymphs below the surface, these bugs are drifting helplessly in the current. When trout feed on these natural insects, it’s not necessary or efficient for them to swim around ambushing them. Rather, a trout will position facing a current, where the insects will drift down his feeding lane. All he has to do is maneuver slightly up, down, or to the side to pick them off.   When a trout feeds in this manner, he’s more or less just moving in front of the bug and opening his mouth.

But there are a lot of things coming down the current and some of them, like small twigs or leaves, may look like an insect to a trout. When he takes one of these foreign objects by mistake, he immediately spits it back out. It’s what a trout does all day. Real bug = swallow, stream junk that looks like a bug = spit it out. When you drift an artificial fly down the current and the trout hits it, he immediately spits it out because it’s not real. So you have that split second between when he eats it and when he spits it to set the hook.

Wild trout, like in the Smokies, are highly instinctive and tend to make this decision pretty quickly. Stocked trout were raised in hatcheries where they were fed daily. They tend to “trust” food a little more and consequently, will hold on to a foreign object (like your fly) a little longer before spitting it out. For that reason, fishermen tend to have a better strike to hook-up ratio on stocked trout vs. wild trout.

In either case, you are rarely going to feel the strike in these scenarios. To avoid drag and present the fly naturally, you will have to have some slack in your line and the fish doesn’t have the fly long enough to tighten your line enough for you to feel it. You will need to visually recognize the strike to tell you when to set the hook. With a dry fly, it’s fairly obvious because the fish will have to break the surface to eat your fly. As soon as you see that, set the hook. It is incredibly difficult in most situations to see a fish eat your nymph, so we often use a strike indicator positioned on the leader. When the fish eats the nymph, it will move the indicator, providing your visual cue to set the hook.

Now, with all of this in mind, here are some tips that may help you connect on a few more fish, particularly when dead-drifting dry flies and nymphs.

 

  • Know that you will probably not feel the strike and trust the visual indication of the strike. Even when streamer fishing when you DO normally feel the strike, there are times when the fish hits between strips when the line is slack. You may not feel it but you’ll see the fly line dart forward. Trust what you see!
  • Expect a strike every time the fly is on the water and be ready. As silly as it sounds, many strikes are missed because the fisherman just isn’t paying attention. Stay focused on what you’re doing. Don’t look at the bird overhead. Don’t look at the next pool up the river. Don’t stand there with your hand on your hip. Be ready!
  • Similar to #2, pay attention to your slack. The cast isn’t when your job ends – it’s when it starts. Particularly when fishing upstream, be prepared to immediately begin collecting excess slack as it drifts back to you. Many fishermen think that they’re missing strikes because they’re too slow when, in fact, their reaction time is fine but they have too much slack to pick up to tighten on the fish. Leave just enough slack to achieve a good drift but no more.
  • Keep your casts as short as possible. Not only will you be more accurate and probably get more strikes, but you’ll have less line to move when setting the hook. In some situations, like slow pools, we are forced to make long casts, but fish from better, closer positions when possible.
  • Move the line. Your hook set should be like making a quick backcast. In other words, if you miss the strike, the line should go in the air behind you like a backcast. If you miss a strike and all of your line is still on the water in front of you, you didn’t move enough line to set the hook.
  • Your hook set should be quick but smooth, and when possible, in an upward motion. A snappy or jerky hook set is a good way to break a tippet. A downward hook setting motion has a tendency to pull the fly out of the fish’s mouth, rather than up through the lip.

Setting the hook is also very much a timing thing. The more time you spend on the water, the better your timing will be and you may find that you sometimes even anticipate the strike just before it happens. And you may find that you have to adjust the timing of your hook set on different rivers. For instance, you may need to slow down a little when fishing for stockers or you may have to speed up a little when fishing for wild trout.

In either case, you’re still going to miss some and that’s okay. As far as fishing problems go, missing strikes is a pretty good one. To miss strikes you have to get strikes. And if you’re getting strikes, you’re doing something right!

Trout of the Smokies

Native Smokies Brook Trout

Over the years, one of the most frequent questions I’ve been asked is about the trout in the Smokies. What kind are there? Where did they come from? How big do they get? Why don’t they get bigger? Why don’t they stock fish in the park? The list goes on and on. I thought I’d take this opportunity to satisfy some of the curiosity of enquiring minds.

Trout fishing in the Smokies starts with brook trout. They are the native fish of the Smoky Mountains. The terms native and wild are often confused and misused when referring to fish. To clarify, a wild trout is a trout that is not stocked but was born in the stream. However, it may have been introduced through stocking at one time. All trout in the Smokies are wild – there has been no stocking since the early 1970’s. A native trout is one that has always been there and was not introduced by humans. Brook trout have been in the Smokies since the last ice age!

Wild Smokies Rainbow

It used to be that every stream in the Smokies had brook trout and rainbows and brown trout were non-existent. The intense logging of the area, prior to its designation as a national park, sparked that change. In the early 1900’s, logging practices simply weren’t very responsible and they cut any and every tree they could get to. When trees near mountain streams were removed, critical canopy to provide shade on these waters disappeared and water temperatures climbed to levels in the warmer months that made them uninhabitable for coldwater species like brook trout. Many of the brook trout migrated to high elevations for cooler water. The ones that didn’t died.

Over time, logging operations came to a stop – in some places because there was nothing left to cut, and in others because the national park was formed and the land was protected. In the former, many streams were stocked with trout (mainly rainbow) to appease some of the emerging sporting clubs and camps. Brown trout were also introduced in a handful of rivers. Even after the formation of the park, the National Park Service continued to stock these rivers with trout.

Wild Smokies Brown

By the time the forest regrew to a level of maturity and much needed canopy returned to cool low and mid elevation streams, the rainbows and browns had established a foothold, and the native brook trout could not compete for the limited food source, forcing their relegation to the high country.

This changed again in the early 1970’s when the NPS began using electroshocking techniques to sample streams for data on fish population and size. Prior to that, they had to rely solely on creel surveys – asking fishermen how many they caught and what size. Well, as you hopefully know, just because you’re not catching fish or seeing fish doesn’t mean there are no fish! The electroshocking proved that, and they learned that they were stocking fish on top of fish. The rainbow and brown trout were all reproducing, and had been for some time.

They ceased the stocking of streams at that time and they have been thriving as wild trout fisheries ever since, boasting park-wide populations of anywhere from 2000 to 6000 fish per square mile. The only two things that seem to make that number fluctuate are flood and drought. They have determined that fishermen have absolutely no impact on the fish numbers. In fact, fisheries biologists agree that it could very well be a healthier fishery, at least when it comes to fish size, if more fishermen kept fish to keep the numbers down.

Brook trout and rainbow trout in the park only live about 4-5 years. Brook trout rarely exceed 10” in size and rainbows rarely exceed 15”. There are no regulations, like catch-and-release or slot limits, that can change this. These mountains are some of the oldest in the world and consequently are more acidic. Streams with low ph levels have less aquatic insect life, which is the primary food source for rainbow and brook trout.

Stocked Clinch River Rainbow

So we simply have too many fish for the available food source. Years with heavy flooding or intense drought often kill a generation of fish, reducing the population significantly. In the year or two following such an event, even though the fish population might be decreased by a third, fishermen still catch the same number of fish they always did, but the fish they do catch average 1-2” bigger. More food for fewer fish equals bigger fish.

Brown trout in the Smokies seem to be the exception to all of this. While they are only in a limited number of streams, they can live 15 years and reach lengths of 30”! Biologists believe one of the main reasons for this is their tendency to add bigger fare to their diet. Rainbows and brookies pretty much stay bug eaters in the park. While brown trout also eat bugs, when they reach a size of 8 or 9”, they also begin eating crayfish, mice, leeches, and smaller fish – including smaller trout!

Brown trout like low light, do a lot of their feeding at night, and are just generally reclusive. So they don’t get caught very often. You simply don’t go to the Smokies expecting to catch 20” brown trout on every trip. But in the right rivers, it’s always a possibility. In general, if you catch a trout in the Smokies bigger than 7” you’ve caught a pretty good fish. If your goal is purely to catch big trout, go to a tailwater, the Smokies isn’t for you.

Tailwaters are rivers created by water release from a dam and there are several in East Tennessee. They are stocked regularly by the Tennessee Wildlife Resources Agency. Most of the trout they stock in these rivers are 7” or bigger and grow quickly thanks to the ample food supply found in these fertile waters.

When it comes to fish size, the bottom line is it’s relative to where you are fishing. A 12” native brook trout in the Smokies is a rare thing and surely qualifies as a “trophy.” A 12” stocked rainbow in the Clinch River is a dime a dozen.

Flies: Sulphurs

If you take East Tennessee as a whole, it’s pretty safe to say one of the most prolific hatches is the sulphur mayfly hatch. Southern tailwaters are generally not known for having significant hatches of mayflies, caddisflies, or stoneflies. When we think of most of these dam-controlled rivers, we typically think of crustaceans like scuds and sow bugs, and midges…. lots and lots of midges. However, one mayfly that hatches on all East Tennessee tailwaters, often in very big numbers, is the sulphur. And that means that your best opportunity to catch a really big fish on a dry fly around these parts is during the sulphur hatch.

On the South Holston, they hatch in huge numbers for nearly nine months of the year. They hatch on the Holston, Hiwassee, Watauga and Caney Fork, too. But when I think of the sulphur hatch, I think of the Clinch River, probably because it was the first really BIG hatch I ever fished as a fly fisherman.  And while it may not be quite as epic as it was 20-30 years ago, it is most definitely still a hatch worth making time for.

Parachute Sulphur

The hatch usually gets started in late April on the Clinch and often lasts well into July. May is the best time to fish it. In April, the bugs are usually just starting to trickle off fairly inconsistently.  By mid June, trout have been seeing these things come off by the thousands for 4-6 hours a day, for 6+ weeks. To say that they become selective is an understatement. But in May, bugs are coming off steadily and the trout haven’t yet learned to count the hackles on your fly before choosing to eat it. They don’t seem to care if it’s on the surface, in the film, or 2” below the surface. In July, that stuff matters! In May, pretty much any pale yellow, size #16 dry fly will do the trick if it’s presented on a dead drift.

Parachutes and Comparaduns tend to be the best choices for dry flies. And there are a host of more sophisticated emergers and cripples to fool the wary, late-hatch fish. Pheasant Tails in brown and olive are usually the best option for nymphs.

Beadhead Pheasant Tail

While exact time and duration varies, the sulphur hatch on the Clinch typically starts in late morning and lasts for 4-6 hours a day, taking you right up to happy hour. Drifting Pheasant Tails will pass the time in the morning while you’re waiting for the main event to start.

Sulphurs are a big deal in the mountains, too. While they won’t come off in the obscene numbers found on the tailwaters, they are still one of the better hatches of the year. In the mountains, the hatch usually lasts 3-4 weeks and tends to be more of an evening event. Many nights, the sulphur hatch will correspond with the Little Yellow Sallies’ return to the water to lay eggs, making for a fast and furious end to the day for those willing to fish through supper.

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Flies: The Frenchie

In the last ten years or so, the term “Euro Nymphing” or “Czech Nymphing” has become more and more common, and is often billed as a revolutionary style of fishing. Basically, it is just nymph fishing without a strike indicator. It’s akin to what many for years have referred to as short-line or straight-line nymphing. Others refer to it as high-sticking. Or the old mountain fishermen around here just call it nymphing, because it’s how they’ve fished for decades and decades.

There is not a lot written about the history of fly fishing in the Southern Appalachians, and most of the techniques were just handed down generation to generation. I’ve had the pleasure and benefit of learning from many of these “old timers,” so when I first heard about this revolutionary style of fishing, I had to chuckle. There really is nothing new under the sun.

There are a few subtle differences in European nymphing techniques and what I learned to do. But what any trend will bring to the industry, no matter how long the method has been around, is the availability of new and better tools and equipment to perform the new trend. In this method of nymphing, you are really trying to keep your fly right on the stream bottom, which of course results in a lot more snags. Traditional jig hooks are great for this because they ride hook up, but until recently, haven’t been available in appropriate sizes and weights for fly fishermen.

Now there are a number of micro-jig hooks available that accommodate a special slotted tungsten bead. They are perfect for fly tying and I have begun tying a lot of my favorite nymph patterns on them. However, one of the first flies I tied on them, The Frenchie, is a pattern that did come from the “Euro-nymphing scene” and it has proven to be an effective trout pattern on a number of different waters.

It’s basically a Bead Head Pheasant Tail with a “hot spot” of bright dubbing at the head. The original pattern uses a bright pink dubbing for the hot spot, and that seems to work very well for stocked trout and even wild trout at times. In general though, I tend to have more success with wild trout using slightly more natural colors like yellow or green.

Again, it’s greatest value is that it has plenty of weight and rides hook up, so you can get it down deep with far fewer bottom snags. Pick some up and give them a try next time you’re out. And if you’re a fly tyer, I’d recommend trying some other favorite nymphs like Pheasant Tails and Hare’s Ears on these hooks.

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Flies: The Hidden Terrestrials

We often hear about the importance of fishing terrestrials in the summer months. Out west, the conversation usually focuses on hoppers. Around here, we talk more about beetles, ants, and inchworms.   Regardless, there are a number of land-based insects from beetles, ants and hoppers to cicadas, bees and black flies that find their way into the water during the summer months.

Just the other day on a guide trip, a customer caught a brook trout that had a mouth full of small beetles. The fish had obviously been very recently gorging on them, but if you studied the surface of the water in that pool, you’d have a tough time finding a single beetle on the water. You would also be challenged to see ants, inchworms, or any other terrestrial. However, if you used a bug seine in that same pool, you would get an entirely different picture.

The fact is these land-based insects are not particularly good swimmers. Most of them, particularly ants, beetles and inchworms, briefly attempt to swim on the surface of the water but soon are caught by currents and swept below the surface.   But nearly every fisherman who fishes terrestrials, fishes them on the surface… and for good reason. Nearly every fly shop or fly manufacturer almost exclusively sells topwater terrestrial patterns. And most of these are constructed of foam or some other highly buoyant material to make the fly ride high on the water.

While you can certainly catch plenty of trout on these patterns and have a blast doing it, you are missing out on A LOT of fish. If you are a fly tier, try tying a few ants with a dubbed body and a hen feather rather than foam and hackle from a rooster neck. Tie some beetles without the high-vis sighter on the back and instead add a few wraps of lead wire. If you don’t tie flies, place a split shot above your favorite terrestrial pattern next time you go fishing.

A great way to fish them in pocket water is with a straight-line nymphing technique, allowing them to swing at the end of the drift. In pools, fish them a few feet under a strike indicator. Or tie on one of those big, buoyant foam hoppers and drop a submerged beetle or ant about 15” off the back. I probably use this method more than any other.

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Flies: The Great 8 (Must have Trout Flies)

With thousands of patterns available, choosing the perfect fly can prove to be a daunting task for any angler, particularly the beginner. However, unless you’re in a situation where trout are selectively feeding on a specific insect that is abundantly hatching, an assortment of well presented attractor patterns will be all you need to catch fish. Every fisherman has a list of favorite flies and over time you will find particular ones with which you are very confident. And that’s really the bottom line. If you have confidence in a fly, you will fish it better and ultimately have more success.

Below is a compilation of flies that seem to work everywhere and would likely be found on most fly angler’s list of favorites – a perfect place start your fly selection! Whether you call a fly shop in Tennessee, Montana, or New Zealand and ask for recommended flies for the area, somewhere on that list you will likely find most if not all of these patterns. These flies are also available as a packaged selection in the Fightmaster Fly Fishing online store.

Dry Flies

1) Parachute Adams: This is an absolute favorite trout fly. It doesn’t look exactly like anything but looks a lot like a lot of things! Carry them in sizes #12-#18 with the smaller versions being ideal for slow water and more finicky trout and the larger being best suited for choppier water where visibility is more important. The traditional grey body is preferred, but a yellow body also does well in the Smokies.

2) Elk Caddis: Another great dry fly, carry this one in sizes #12-#18 and with body colors of olive, tan, and yellow. The down wing on this pattern gives it a little different profile than the Adams and the combination of elk hair and hackle make this fly float like a cork.

3) Griffith’s Gnat: This is a great general purpose small fly. Fished most often in sizes #16-#20, it is a great imitation for adult midges, small mayflies or caddis, and even ants. Many of the most finicky, rising trout that have been caught have been on a Griffith’s Gnat.

Nymphs

4) Pheasant Tail: An incredibly universal pattern that looks like almost every nymph you’ll find under a submerged rock. While you’ll most often fish the bead head version, also carry the traditional version for a more realistic pattern that can more easily be fished in different levels of the water column. Carry both varieties in sizes #12-#18.

5) Hare’s Ear: For the same reasons as the Pheasant Tail, carry bead head and traditional versions of this fly, and in the same sizes. The big difference in the two nymphs is the Hare’s Ear provides an option for a lighter colored nymph and it is a little “buggier” than the Pheasant Tail, providing more movement. Most tend to favor the traditional tan body color but an olive body is also very effective and versatile.

6) Prince Nymph: This fly gives you that all important peacock herl factor which trout seem to dig. The white colored goose biots on the back also seems to grab the attention of fish. I’m not sure if anyone knows exactly what it’s supposed to imitate but the bottom line is it works! A Zug Bug is a close cousin to the Prince and would likely make many anglers’ favorite fly list. The two are similar and you can’t go wrong with either. Carry them in sizes #8-#16.

7) Zebra Midge: This fly will cover most of your small nymph needs. It is a simple pattern but extremely effective. Best fished in tailwaters and slow pools in mountain streams, carry it in sizes #18-#22. Most tend to prefer the tungsten bead head versions with black, red, or olive bodies.

Streamers

8) Wooly Bugger: While there are numerous great streamers out there, only one made this list as a must have, probably because of its incredible versatility. The Wooly Bugger, carried in a variety of colors, can facilitate almost any streamer need. Carry them in black, olive, tan, and white in sizes #4-#10 and you have an effective imitation for small baitfish, leeches, and crayfish. In a pinch, you can even dead drift a Wooly Bugger as a pretty effective imitation for a stonefly nymph or hellgramite. Whether you choose bead or no bead, flash or no flash, you have a fly capable of catching most any kind of fish in any kind of water.

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Flies: Wooly Bugger

Leech? Stonefly? Hellgrammite? Minnow?

Ask any fly fisherman with any experience at all to name his top ten, “must have” flies and I guarantee that 9 out of 10, at least, will include a Wooly Bugger. And the handful who don’t mention it are likely just contrarians. But why? Why is this such a popular fly that is a staple in nearly every angler’s fly box?

I suppose everyone might have their own answer to that question, but for me, the short answer is versatility. The Wooly Bugger was one of the first flies I ever learned about and with it, over my many years of fly fishing, I’ve caught rainbow trout, brown trout, brook trout, largemouth bass, smallmouth bass, white bass, rock bass, mooneye, carp, catfish, crappie, bluegill, striper, gar, walleye, and salmon. And I’ve caught fish with it in lakes, ponds, deep rivers, shallow mountain streams, and tailwaters. I suspect the only reason I’ve never caught fish on it in saltwater is that I’ve never tried.

This one could easily pass for a crayfish

What’s it supposed to be? That’s the beauty of it. Depending on how you tie it and how you fish it, it can represent a number of food items. For instance, tied in black and retrieved slowly, it probably represents a leech. Tied in lighter colors and stripped more quickly and erratically, it looks like a baitfish. Tied in a combination of olive and/or rusty colors, it resembles a crayfish. Tied in darker colors and fished on a dead drift, it could imitate a stonefly or hellgrammite nymph. Tie it in bright colors, maybe with an egg on the front, and you have a fly for salmon, steelhead, or many stocked trout.

Try this purple and pink Bugger for winter stockers

Because of its versatility, it could be mentioned as a recommended fly for any month of the year. I selected it for November for a couple of reasons. One, there are just not many hatches or any unusual flies to single out in November. Two, this is one of the big months to fish for large browns in the park. Post spawn brown trout are hungry and winter is coming soon. While you can certainly catch them on smaller flies, why not show them a little bigger meal? Wooly Buggers are big fish flies. At the end of the day, that’s probably the real reason it’s such a successful fly – because it looks like a big meal.

Next time you’re not sure what the fish are biting on, tie on a Bugger. Dead drift it in a riffle. Strip it through a deep flat. Play with it. You may be surprised what you find!

Flies: Little Yellow Sallies

Yellow Sally Adult

April is one of the busiest months of the year for hatches and provides a smorgasbord of bugs for our finned friends. It’s also when we begin to see the change in color schemes on adult aquatic insects.

Aquatic insect adults are not only great sources of food for fish but also for birds. As a matter of fact, when you begin to see large numbers of swallows gather above the water and swooping down to the surface, it’s a sign for you to get ready because the hatch is beginning. Once the bugs have safely made it off the water, nature helps take care of them with appropriate camouflage to blend in with streamside trees and vegetation.

In the winter and early spring, most of your aquatic insect adults are black, grey, or some other dark color to better blend in with the dark, bare branches around the water. As we get later into spring and things begin to bloom, you begin to see more light- colored insects, such as tan and yellow. By the time summer rolls around, almost all of the adult insects are brighter yellows and greens to blend in with the abundant vegetation. And in the fall, you see more bugs with reds and oranges. There are of course plenty of exceptions to this but it’s a good guideline to follow with fly selection if you don’t know exactly what’s hatching.

So, April is a transitional month for color. Early in the month, we’re seeing the tail end of some of the darker bugs like Quill Gordons and Blue Quills, and by the end of the month we’re starting to see yellow bugs like Sulphurs and Little Yellow Sallies.

Egg Laying Imitation

Most of the hatches in the early part of the month are sparse and can be covered with generic flies like a Parachute Adams. The first hatch of significance in April is the Little Yellow Sally stonefly. It is one of the most prolific hatches in the Southern Appalachian Mountains, beginning usually around the third week of April and lasting well into July.

Unlike mayflies and caddisflies, stoneflies do not hatch in the water. Rather, the nymph will crawl out of the water onto a rock before hatching. Pay attention when you are on the water, and you’ll probably notice empty stonefly cases on exposed stream rocks. This means that the adult stonefly is not nearly as important to the fly fisherman because the adults are not nearly as available to the trout. We focus more on imitating stonefly nymphs, and for dry flies, focus more on the adult when it returns to the stream to lay eggs. You’ll notice that many of the adult Little Yellow Sally imitations are tied with a red butt for that very reason – to imitate the egg layer.

Little Yellow Sally Nymph

Stoneflies are often large bugs but that isn’t the case with the Little Yellow Sally, as suggested by the name. These are commonly found in size #16 and are typically a very bright yellow, and sometimes chartreuse. They tend to hatch sporadically through the day and return to the water in the evening to lay eggs. Typically, the later in the hatch it is, the later in the day they will return to the water. So, in April, you may see them dive bombing the water to lay eggs in the early evening, while in late June, that’s probably not going to happen until almost dark.

Neversink Caddis

There are a number of good imitations for the adult Yellow Sally. A yellow Neversink Caddis is one of my favorite “searching patterns.” For the nymph, you’ll want something tan to yellow in color. A small Tellico nymph or even a Hare’s Ear nymph should do the trick. And again, if you’re fishing when they’re laying eggs, something with a red butt can be very effective. Just plan to stay out late!

Learn more about Smoky Mountain hatches and flies in my hatch guide.