How Stuff Works – Page 2 – Fightmaster Flyfishing Journal

March 13, 2018March 27, 2018

How Stuff Works: Strike Indicators

There seems to be few things in the fly fishing world that provoke as much debate as strike indicators. The mere existence of strike indicators in the sport of fly fishing can inspire rants from fly fishing purists that rival any political rant of that friend you just hid from your Facebook feed. But even among the firmly pro indicator crowd, nymphers will argue fiercely about the superiority of one type of indicator over another.

For newbies to the sport, a strike indicator is something that is often used while fishing with nymphs (sub surface flies). It is a brightly colored, floating object that is affixed to the leader intended to give the fisherman a visual indication when the fish hits his submerged fly, or nymph. Since the nymph usually can’t be seen under the water, and since it is usually fished with a slack line to achieve a dead drift, the strike can be difficult to detect without the visual aid of a strike indicator. Strike indicators can also be helpful in making sure the nymph is drifting properly (without drag) and at the desired depth.

The obvious question usually arises when hearing this description, “Isn’t that just a bobber?” Pardon the bobber pun, but that opens a whole other can of worms. There are a number of fly fishermen who will stop just short of taking a swing at you if you call a strike indicator a bobber. I assume this animosity stems from the association of bobbers with bait fishermen and fishing live bait; and fly fishermen don’t like to think anything they do might resemble bait fishing. So they call them strike indicators. The truth is that while strike indicators are typically smaller, lighter, and made from different materials than bobbers, they pretty much accomplish the same thing.

I use the term strike indicator because I think there is enough of a difference to specify, kind of like I don’t refer to a hamburger as a sandwich. It’s just different enough. But I won’t be offended if you call a hamburger a sandwich and it won’t offend me if you call a strike indicator a bobber!

Getting re-focused specifically on strike indicators, there are a lot of different kinds, and that’s what I want to focus on here. As mentioned before, most fly fishermen have their favorites, and a lot about selecting strike indicators will boil down to

personal preference. I personally don’t think there is such a thing as the perfect strike indicator. They all have pros and cons and I use different ones for different situations. Often I don’t use one at all, but that’s a topic for another article. Below is a list of some of the more common or popular strike indicators with a description of how they work and some of their strengths and weaknesses.

Hard Toothpick Indicators: These are usually made of cork, or balsa, or something similar. They are typically round or oval with a hole drilled in the center. The leader/tippet is inserted through the hole and the indicator may be moved to any position on the leader. Once the desired position is determined, the provided “toothpick” is inserted into the hole to hold the indicator in place.

These are great because they are buoyant, highly visible, reusable, and can easily be adjusted up and down the line to set the nymph at different depths. However, they tend to make more disturbance when they land on the water and can spook more skittish fish. Additionally, their mass makes them difficult to cast when placed on the tippet portion of the leader for shallow nymphing, though smaller ones can be purchased. They are best for deep to mid-depth nymphing and for quick and easy depth adjustment.

Hard Rubber Band Indicators: These are typically oval in shape and made from the same materials as the hard toothpick type indicators. Instead of having a hole and a toothpick, they have a slit that contains athick rubber band. The leader is inserted into the slit and the indicator is then rotated, allowing the rubber band to twist around the leader to hold the indicator in place.

They have pretty much the same pros and cons as the toothpick indicators. One additional advantage is they can be added or removed while the fly is still attached. However, they have a tendency to kink the leader when twisted on, and they come off the line more easily than other indicators when casting.

Balloon Style Indicators: The best known versions of these are the Thingamabobber and Air Lock. These are basically small, plastic balloons. They float great, are highly visible, and can be easily adjusted. They are particularly good if you need an indicator that will suspend larger, heavier flies. The Thingamaboober attaches by looping the leader through a hole and around the indicator. The Air Lock has a slot in the base where the leader is inserted and a separate piece that screws on to hold the indicator in place.

Much like the other hard indicators, when this indicator is set in the tippet section of the leader for shallow nymphing, it is difficult to cast and can create more tangles. It also lands hard on the water. It is more durable and floats better than the other hard indicators.

Stick-On Indicators: These are small round or oval pieces of foam that peel off and stick on to the leader. Their greatest value is that they cast easily, even when placed on the tippet and they make very little commotion on the water. So they are a great indicator for shallow nymphing. They float great and multiple indicators can be added to the line to support more weight.

The biggest downside to these is they are not reusable and they are not easily adjusted. When moved they lose a lot of their stick and then have a tendency to slide down the leader. They can usually be moved a few times before you have to trash them. Some complain that they also leave a sticky residue on the leader but I haven’t found that to be a problem.

Yarn Indicators: These are made from a buoyant yarn that is often pre-treated with a waterproofing agent, but floatant may also be added. There are a number of different versions of yarn indicators, but most attach by using some sort of slip knot or loop knot. Like the stick-ons, yarn can be attached to the tippet end of the leader without the worry of a hard landing or a lot of tangles. So this is another good choice for shallow nymphing. Yarn indicators are also very sensitive, so they are great for detecting subtle strikes.

On the downside, I find them difficult to add and remove from the line and when removed, they regularly leave kinks in the line. Larger yarn indicators can be wind resistant and difficult to cast in tight places and they require a little more maintenance to keep them floating.

Putty Indicators: Strike putty comes in a small tub and resembles Play-Doh. You pull out a small gob or big gob depending on how big you want your indicator to be, and you smoosh and roll it on your leader. One of the benefits it that you can smoosh more on if you need more flotation for bigger, heavier flies, or you can pick some off for smaller flies and spookier fish.

I’m trying to be impartial here but I don’t like this stuff. It always comes off, especially in warm weather. It leaves a permanent indicator-colored smudge on your line when you remove it. Finally, every bit of dirt in the vicinity attaches to it, so what starts as orange strike putty soon becomes and greyish, brownish, greenish, orange strike putty.

Dry Fly: In the right situations, a dry fly can serve as an edible strike indicator by adding a nymph “dropper” to it. For many, this is the go-to method because you’re essentially doubling your chances… or so it might seem. Just like any other strike indicator, a dry fly has its pros and cons.

Obviously, one of the big perks is that you have the potential to catch a fish on the nymph or the indicator, since the indicator is a fly. However, most dry flies don’t have near the buoyancy as an actual strike indicator, so if you’re needing to get heavier nymphs near the bottom of a deeper run, the dry fly will routinely get dragged under. In such a scenario, you’re not fishing the dry fly or the nymph very well, and hardly doubling your chances.

The best scenario for fishing a dry fly with a dropper is when you don’t need to get your nymph very deep, and you can fish a dry fly buoyant enough to support the nymph’s weight. I immediately think of pocket water. Another scenario might be in flatter water during a hatch, where you could put a nymph with little to no weight behind a dry fly to suggest an emerger.

The takeaway from all of this should be that there is not one strike indicator that is going to be perfect for every situation. You will likely need a variety to meet a variety of conditions. As with most things, much of it will boil down to personal preference and you should play around with a few different types to find what best meets your needs.

March 13, 2018March 26, 2018

How Stuff Works: Reels

Compared to most spin and bait casting reels, fly reels are pretty simple. Yes, there are always exceptions, but the typical fly reel has a single, direct drive, where one rotation of your hand equals one rotation of the reel. There have, over the years, been multipliers and automatic reels, but all of the extra gears required for them add a significant amount of weight (more on the importance of reel weight later), just to perform a task that usually isn’t necessary.

The drag on a fly reel is also fairly simple. Drag, as it pertains to reels, just refers to the amount pressure the reel puts on the spool as it rotates. In other words, if you’re playing a fish on the reel, when he runs, the reel will apply a preset amount of pressure on him that is determined by your drag setting. Most fly reels will have some version of either a disc drag or a spring and pawl drag.

Disc drags are quieter, apply smoother pressure and allow for significantly more variations in resistance. They are often the choice for fish that may be larger or that make long, strong runs. Spring and pawl drags are lighter in weight and provide a classic “clicking” sound desired by many fishermen. They are often the choice for smaller, lighter rods and when fishing for smaller fish.

More expensive reels, particularly those used in saltwater, tend to have fairly sophisticated drag systems. Orvis had a reel a few years ago that touted a drag system modeled after the brakes used on fighter jets! That’s not a bad thing to have if you’re playing a 150 lb. tarpon, but may be a bit over the top for an 8” Smoky Mountain brook trout! The other thing that significantly impacts the price of a reel is how it is constructed and the material from which it is made.

In addition to possibly plastic components in the drag system, less expensive reels will often be made of a lower grade, softer aluminum that is cast from a mold. This will result in a reel that is a little heavier and a little more prone to denting or bending. In addition to non-corrosive, stainless steel (or similar) drag components, often in a sealed housing, higher end reels will be machined from a high grade, bar stock aluminum. This will result in a reel that is lighter, more resistant to the damages of saltwater, and much more durable.

Another fly reel feature that is becoming more and more common is a larger arbor. Traditionally, fly reels had a very small spindle to which the line attached. A significant amount of backing was put on the reel before attaching the fly line to fill space on the reel. Otherwise, the fly line would come off in smaller, tighter coils and be difficult to keep straight. Mid and large arbor reels are a little wider than traditional reels and have a much larger “spindle.” This not only allows you to retrieve more line in one turn of the reel, but it doesn’t require as much backing. You still want some backing as an “insurance policy” if you hook a bigger fish, but you don’t need 100 yards of it like you did on traditional reels.

If you’re going to be fly fishing in saltwater, the reel is probably THE most important piece of equipment you’ll purchase. However, for most freshwater fly fishing situations, the reel is one of your least important pieces of equipment. Certainly it still has an important function, to store all of your line, but that’s about it. Most of the time when fishing for trout, or bass, or bluegill, you’re going to be playing the fish by hand, stripping the line under the finger on your rod hand to bring the fish in.

So if you’re looking for an outfit for saltwater or even something like salmon or steelhead, and you have a set budget, put as much money in the reel as you can and skimp on the rod. If you’re looking for a freshwater outfit for say, trout or bass, put far less in the reel and more in the rod and line.

However, for many fly fishermen, reels are almost like jewelry. I know guys that fish for nothing but mountain trout and have $600 reels. They think they’re “neat.” Some reels even have elaborate artwork on them to appeal to the “jewelry crowd.” Sometimes we make choices because they’re practical, and sometimes we make choices because they make us happy. If you have the disposable income and want to buy a $600 reel with a drag system that stops fighter jets to put on your 8’ 3-weight trout rod, have at it! But you don’t need to.

Regardless of your budget, there are a couple of things that you’ll want to make sure that you get in a reel. One, make sure it has enough of drag resistance to prevent the reel from ‘free-spooling” when you strip line from it. Second, make sure that the reel is an appropriate size for your line and rod.

Most reel models will come in different sizes for this reason. Heavier fly line weights will take up more space on the reel so you need a bigger reel to accommodate them and the appropriate amount of backing. On a similar note, rods that cast heavier lines weigh more and need bigger, heavier reels to balance them out. Regardless of how heavy or light your fly rod is, if you don’t have a reel that balances it out, it’s going to feel awkward in your hand. It’s much like carrying two buckets of water rather than one. Two buckets might be heavier overall, but will be more comfortable to carry because they balance each other out. You can view the specs on any reel and see what its weight and line capacity is.

March 13, 2018September 28, 2018

How Stuff Works: Polarized Sunglasses

I once heard a highly regarded fly fisherman say that he considered polarized sunglasses to be his most important piece of gear. These sort of statements always amuse me because I can’t help to wonder how important those sunglasses would be if he didn’t have a rod or a line or a fly! But I definitely get what he meant. While polarized sunglasses may not be THE most important piece of gear, they are often the most underestimated by many fishermen.

Many fishermen, particularly those new to the sport, probably underestimate them because they don’t understand the difference in sunglasses and polarized sunglasses. They see sunglasses as merely a means of protecting your eyes from bright light and may opt not to wear them at all on overcast days or when fishing in shadier locations like the mountains. While polarized sunglasses do protect your eyes and reduce eyestrain in bright conditions, they have far greater importance when it comes to tactical applications.

Light usually scatters in all directions, but when it’s reflected from flat surfaces, it typically becomes polarized, travelling in a more uniform (usually horizontal) direction. This creates a serious intensity of reflected light that causes glare and reduces visibility. The more reflective that flat surface is, the more intense the glare will be – consider how a signaling mirror works.

Water has highly reflective properties and basically acts like a mirror that intensifies those reflected rays even more. I’m sure everyone can think of instances when driving where significant glare was encountered. More than likely, the worst glare you ever encountered when driving was during or right after a rain. Pavement is a flat surface that can reflect light and cause glare. Wet pavement intensifies that reflection and creates more intense glare. With that in mind, it stands to reason that you will get even more intense glare when light reflects off the surface of lakes, rivers, streams, etc.

So, “regular” sunglasses will help in these situations by essentially darkening this reflected light, making it less stressful to your eye, but the glare will still be there and will prohibit you from seeing anything on, or in the case of water, under that surface. But the chemical filter on the lenses of polarized sunglasses is designed to absorb horizontal light waves, while still allowing vertical waves to pass through. Because light only travels in one direction through polarized lenses, glare is eliminated, or at least reduced.

Contrary to what I believe many anglers expect, this technology does not create “magic fish-seeing glasses!” Fish will not suddenly be visible when you put on your polarized glasses, but with better ability to see through the water, you will be much better equipped to spot fish. However, the most consistent benefits you will receive from polarized glasses are the ability to better see your dry fly on the surface, and the ability to read water by better recognizing slower seams and deeper troughs and pockets. Additionally, being able to better see the stream bottom will allow for easier, safer wading.

Just how well your polarized glasses eliminate glare often depends on the angle the light hits and reflects off the water. There will be times on bright sunny days when the light reflects at such a severe angle that even the polarized lenses don’t seem to help. During these times, your best bet is to change the angle the light is hitting your eye by repositioning. For example, you may be on the left side of the stream facing and fishing toward the right and encounter an insurmountable amount of glare. Often by fishing from the other side of the stream and facing/fishing the other direction, you can totally eliminate the glare.

Even on overcast days or in shady areas, you can encounter significant glare, so I almost always wear polarized glasses when fishing. This is where lens color becomes important. Darker lens colors, like gray, will block more light, making them more ideal for bright conditions. They also work well on deep blue water and better maintain true color. But they block a little too much light in low light conditions like overcast, heavy shade, or dawn and dusk, which offsets the benefits of polarization.

Lighter lens colors, like yellow or rose, allow more light in and are perfect for fishing in low light conditions. They often even make things appear brighter. But in bright conditions, you want something that will filter light, not magnify it, so these are not good choices for sunny conditions on open water.

If you plan to fish a lot and expect to fish in a variety of different light conditions, you may find it beneficial to have multiple pairs of polarized glasses in different lens colors. But if you’re looking for one, multi-purpose lens color, an amber, copper or brown color sort of fits right in the middle. And these lens colors work particularly well in shallow water where most fly fishermen operate.

The shape of the frames can also be a factor in how well the glasses work. Frames that “wrap” more will help prevent direct and/or reflected light from entering on the sides. “Straight” frames, like an aviator style, allow more light in from side and rear angles. While prescription polarized sunglasses are available they can be problematic in a wrap style frame. Essentially, you’re dealing with a bent lens on a wrap style frame. The stronger the prescription and the more severe the bend in the lens, the more distortion you’ll get when looking side to side. Straight frames are better suited for prescription sunglasses.

If you wear corrective lenses and prefer the benefits of a wrap style frame or if you simply don’t want to fork over the money for prescription sunglasses, there are a number “fitover” sunglasses that are designed to be worn right over your regular eyeglasses.

March 13, 2018March 26, 2018

How Stuff Works: Leaders & Tippet

It’s nearly impossible to talk about leaders without talking about tippet, and vice versa. However, we could go into an enormous amount of detail on either of them – so much so that it would defeat the intended purpose of a brief monthly article that attempts to provide a simple definition of how particular pieces of fly fishing gear “work.” So, consider this a broad introduction of how the two things work together as part of the overall fly fishing “system.” We’ll talk about each individually in more detail in future articles.

The leader is the monofilament (usually) connection between the weighted fly line and the fly. Most commonly 7’ to 12’ in length, the leader is typically tapered and consists of three parts: the butt, the taper, and the tippet. These parts can be completely separate and easily distinguished in formulated leaders that are created by knotting different diameters of monofilament together. However, most commercially produced leaders are created with an acid process that results in a knotless, seamless taper from top to bottom.

In either case, the butt is the thickest section that attaches to the fly line. Its purpose is to “turn the leader over” with the cast. A leader with no butt, or too thin of a butt, has a tendency to collapse rather than extend and straighten. The tippet is the thinnest part of the leader that attaches to the fly. It is intended to allow the energy of the cast to dissipate, resulting in a cast that doesn’t crash on the water. The tippet also allows for a less visible connection to the fly. The taper is the section between the butt and tippet that provides a smooth, progressive transfer of energy. A leader with a thick butt tied directly to thin tippet has a tendency to “hinge.”

Leaders are primarily sized by their length and tippet size. So, if you purchase a 9’ 5x leader, it has a tippet size of 5X and its overall length is 9’. As a general rule, longer leaders are advantageous for not only creating more distance between fly line and fly, but for achieving better drifts in “technical” currents. However, they are more difficult to cast and more prone to find overhanging limbs! A shorter leader can allow for more accuracy in tighter areas.

The tippet is sized by its diameter and is indicated by a number followed by an “x.” The bigger the number, the smaller the tippet, so a 6X tippet is considerably smaller than a 2X tippet. Without getting too deep into the history of what now seems a rather antiquated system, it all works off the number 11. If you subtract the tippet size from 11, you get the actual diameter measured in thousandths of an inch. For instance, 6X tippet is .005”. It works in reverse too. If the actual diameter of the monofilament is .007”, the tippet size is 4X: 11-7=4. Pretty weird, huh?

You don’t need to know all of that, though. Just know that the tippet size should typically be chosen based on the fly size. Small flies should have small tippets and big flies should have big tippets. Some leader packages will have cross-reference charts on the back indicating which tippet sizes match which fly sizes. Another neat trick is to divide the fly size by 3. So a size #12 fly would best match a size 4X tippet. Could you use a 5X tippet on a #12 fly? Absolutely. This is just a guideline. But the farther you stray from the guideline the more problems you’ll encounter.

In addition to being part of the leader, tippet can be purchased by itself on spools. Tippet material can be pulled from the spool and spliced to the leader with a knot to rebuild or alter the leader. For instance, if you start the day with a 9’ 5X leader and you change flies a few times or break off in a tree, your tippet gets shorter and shorter. You can add tippet from a spool when this happens to build the leader back to its original size.

March 13, 2018March 26, 2018

How Stuff Works: Landing Nets

Landing nets are designed to enable anglers to land a fish more easily and safely. They are most beneficial when dealing with larger fish that have a tendency to make one last dart or head shake when you try to grab them, often resulting in the tippet breaking. While in the Smokies, I rarely carry a net because the fish are typically not very large and can be landed by hand with very little trouble, and a net is just one more thing to carry. But I use a net regularly when fishing tailwaters and delayed harvest streams.

Traditionally, nets have been made with a wood frame and cotton netting and that style is still common today. However, wooden frames are more and more frequently being replaced by lighter, carbon frames and rubber is replacing cotton for the netting. The rubber netting has a number of advantages over cotton – the most notable being that it is better on the fish. Cotton netting has a tendency to get caught and tangled in the fins, gills and teeth of the fish and with trout, absorbs and removes some of their protective “slime.” Fly hooks also catch and easily tangle in cotton netting. Rubber netting eliminates all of these problems and holds far less odor than cotton.

Other things to consider when looking for a net are the size and shape. Obviously, if you’re expecting to catch bigger fish you’re going to want a bigger net. A 20-pound striper just won’t fit in a 16 ½” trout net. Landing nets are typically sized by the overall length, including handle, as well as the size of the head (the part that holds the netting). The size of the head should be chosen based on the size of fish you’re pursuing while the overall length (or the handle size) should be chosen based on how you will be pursuing them. For instance, if fishing from a boat, a longer handle may be desirable since it’s more difficult to get the fish close to you. If wading, a long handled net might be too cumbersome to carry all day.

If you plan to carry a net with you when wading, there are a number of options that will help keep the net out of the way, yet easy to access when needed. Most every fishing vest or jacket has a D-Ring on the back. The sole purpose of that ring is to clip your net on it. To make it even easier, there are magnetic connectors that include a section of plastic, “pig tail” type cord that allow you to utilize the net while it remains tethered to you. There are also oversized retractors that accomplish the same thing.

Folks who choose to use sling packs or hip packs tend to have trouble finding a suitable location for attaching their net. Attaching it to the pack with a traditional retractor or magnetic connector often leaves it hanging too low or in a location that impedes the casting stroke. I know many who have remedied this by using a type of net “holster” placed on a belt. The net is stored handle down and drawn from the holster when needed.

Like most things in fly fishing, there doesn’t seem to be a “one size fits all” solution to the type of net you use or the method you use to carry it. It’s a matter of finding something that best fits most of your needs and carrying it in the least obtrusive way possible.

March 13, 2018March 26, 2018

How Stuff Works: Fly Lines

For those with more of a spin fishing or bait fishing background, you may be used to casting a weighted lure or live bait with sinkers. You have a reel of monofilament line and when you cast, you propel the weighted lure forward and it carries all of the monofilament line with it.

In fly fishing, we’re using virtually weightless flies, many designed to float on the surface of the water. Even weighted flies that are designed to sink don’t have enough weight to carry themselves any sort of distance. We use the fly line for that. In essence, the fly line replaces the weight of a lure. When spin fishing, a weighted lure carries a weightless line when cast. In fly fishing, a weighted line carries a weightless lure.

Most fly lines will have a core of come sort and a plastic coating. Saltwater lines usually have a more rigid monofilament core, while freshwater lines usually have a softer, suppler Dacron core. When the plastic coating is applied, it is usually done in such a way to achieve a particular taper. The taper is how and where the weight is placed on the line and how it is designed to behave.

A weight forward taper is the most common. If the fly line is 90’ long, which is typical, the first 50’ or so that attaches to the backing and the reel will be thinner and level. Approximately the front 40’ of line will be thicker except for the last few feet where it attaches to the leader. The intention is for the weight to be in the front part of your line to maximize casting efficiency at your most common distances. For longer casts, the thicker, weighted portion “pulls” the thinner, un-weighted portion behind it with a technique called shooting line.

There are variations on this weight forward design for specialty situations. For instance, a bass line may have a shorter but more dramatic taper, where more weight is placed in a smaller area. The purpose of this is to aide in turning over the heavier, more wind resistant flies commonly used in bass fishing. Some of these variations are referred to as ‘shooting heads.”

A double taper line is becoming less and less popular but is one I still really like for fishing smaller streams like in the Smokies. It has a more gradual taper and it tapers equally from the middle of the line out to each end. This design allows for more delicate, accurate presentations at distances of 40’ and closer, and it roll casts extremely well. It’s also nice because you when you wear out one end of the line, you can turn it around and use the other. It is a disadvantage for distance casting because when you get beyond 40’, you get into the “reverse taper.”

You may also run across level lines, especially at discount type stores. There is no taper to level lines. They can be attractive to the beginner because they are so inexpensive but they cast horribly. Unless you are getting into some specialty techniques, I would avoid level lines altogether.

Most fly lines float. Even when fishing weighted flies in streams, a floating line is most often used because the fly and leader can usually sink enough to get the fly where it needs to be. However, there are sink tip lines available in different weights, where the front part of the fly line will sink to get a fly down deeper and faster. These are more commonly used for streamer fishing in lakes or deep, swift rivers. Full sinking lines are also available but not used very frequently. They allow the entire line to sink but are extremely difficult to cast.

Fly lines are sized by a line weight that is designated by a single number like a 4-weight or 9-weight. This is intended to match the same designation on a fly rod, so you would use a 5-weight line on a 5-weight rod. It takes the amount of weight in a 5-weight line to properly flex or “load” a 5-weight rod and make it cast its best. If you used a 2-weight line on a 5-weight rod, there wouldn’t be enough weight to load it and you’d throw your arm out trying to get the line out. If you used an 8-weight line on a 5-weight rod, it would overload it, resulting in a hard, clunky cast that was hard to control. There may be some specialized situations where you may want to over-line or under-line a rod, but 99% of the time, you want to match the line weight to the rod.

You choose what line weight (and rod weight) you need based on what you’re fishing for. For trout, you’re typically casting smaller flies to fish in clear water and trying to achieve delicate presentations. Lighter lines in the 3 to 5-weight range are common. For largemouth bass, you’re probably fishing more stained water and commonly casting bigger, more wind resistant flies. You’ll be able to better accomplish this with 7 to 9-weight lines/rods. In saltwater, you probably want heavier lines not only for heavier flies, but also to contend with heavier winds.

March 2, 2018March 25, 2018

Nippers

It’s Time to Quit Using Your Teeth….

Welcome to the wonderful world of nippers! It’s probably pretty easy to figure out that the primary function of nippers (aka clippers, cutters, snips, etc.) is to cut your line. They are mostly used to trim the tag ends of monofilament after tying a knot or to cut a new piece of tippet from a spool. But as you’ll see, the right pair of nippers can perform a number of other tasks as well.

As I have described before, my beginnings in this sport were humble at best and my funds were rather limited. There was a lot I could do with $10 back then and I certainly didn’t want to waste it on nippers – not when I could just use fingernail clippers. That strategy served me well for a time, until I figured out what a lot of fishermen eventually figure out. First, fingernail clippers are made of very cheap, soft metal, and after repeatedly clipping monofilament line, they begin forming a series of nicks in the blade. It’s not long before they become completely useless. Second, when regularly exposed to water (such as every time you go fishing), they rust – quickly.

So you can constantly replace in expensive fingernail clippers or you can do what I ultimately did – drop $10 on a decent pair of nippers. They’re rustproof and will last years before the blades begin wearing out. The other benefit to a good pair of nippers is they are designed to cut line, not fingernails. What does that mean?

When working with smaller trout flies, particularly dry flies, it can be difficult to prevent the large, curved head of generic fingernail clippers from also clipping away some of the hackle. The straight, somewhat recessed blades on fly fishing nippers are designed work and cut in tight spaces. Most nippers designed for fly fishing also include another simple but highly useful feature – a small needle.

When a fly tyer finishes a fly, thread is knotted near the hook eye and coated with a thin, invisible cement. Well, in the world of fly tying, time is money and production fly tyers apply that cement quickly, often leaving an invisible layer in the hook eye. When it comes time for you to tie that fly on your line, you can’t get the tippet through the hook eye because it’s coated in glue. This happens even more frequently with hard-bodied poppers that might be dipped in paint, only it’s the paint that is coating the hook eye. The little needle on your

nippers is designed to clear that layer of cement or paint and preserve your sanity when attempting to attach a fly.

As with most any fly fishing product these days, there are seemingly endless nipper styles and features to suit your needs and tastes. Some are just shaped differently, boasting a better ergonomic design. Others are equipped with additional tools for tasks such as tying knots or sharpening hooks. And if you want to take it to the next level, check out this description of Abel’s nippers:

Designed, manufactured and assembled in the USA
Anodized 6061-T6 aluminum body construction
Replaceable jaws – machined out of premium grade Crucible CPM S35VN stainlesssteel, then heat treated to 58-60rc
Engineered to cut 7X – 100 lb mono and braid
Two Year limited warranty on the jaws after initial purchase
Pin – 316 stainless steelAnd they can be yours in black for a mere $85. For custom colors, they’re just $105. And with a cool fish print… a steal at $165. Yep, $165 for line cutters. All of a sudden, $10 for a pair of nippers doesn’t sound too bad, does it? As with anything else, if you have the disposable income and want to spend $165 of it on nippers, go ahead. I won’t judge you.