A Matter of Degrees – Understanding Water Temperature

One of the most significant factors that determines how, when, or even IF a trout feeds, is water temperature – at least with wild trout. Stocked trout are raised in hatcheries and fed every day, so they are used to eating every day. Water temperature can impact the way they feed but not nearly to the extent it does a wild trout.

Fishing for stocked trout can still be productive in excessively cold water temperatures

An ideal water temperature for a trout is in the upper 50’s to low 60’s. If you show up at the river, dunk your thermometer in the water, and get a reading of 60-degrees, chances are you’re going to have a pretty good day – assuming you do everything else right. On the other hand, if you do everything exactly right but the water temperature is 38-degrees, you may not even get a strike.

On a broader scale, I think of anything between 50 and 68-degrees to be reasonable. But there are variables. 52-degrees and falling due to a cold front may result in tough fishing. 48-degrees and rising due to a warm front may produce excellent fishing. Fish will probably be sluggish if it’s 68-degrees and rising in a summer drought. But 68-degrees and falling because of a summer rain may really turn them on.

With warmer temperatures, it’s more about the oxygen than anything. Trout need oxygenated water and typically, the warmer the water, the less oxygen. If water temperatures hit 75-degrees for more than a few days in a row, trout can’t survive. They’ll either search out more suitable conditions or die.

A stream thermometer can be a valuable tool when searching for active trout

With excessively cold water, it’s more about metabolism. As a survival mechanism, their metabolism changes when water temperatures get extremely cold and they don’t require as much food. It’s similar to a bear during hibernation. So if you’ve ever tried to get me to take you fishing in the Smokies in January and I talked you out of it, that’s why. I have great gear and am not afraid of getting out in the cold, but the fish just wouldn’t be feeding.

On some extremely fertile rivers, this may not be the case. There may be enough food through the winter to keep the fish feeding. I know I’ve fished some excellent winter hatches in Montana. But the streams of the Smokies are the opposite of fertile. They’re some of the oldest mountains in the world and consequently very acidic and nutrient poor, which means there is just not a lot of food, especially in the winter.

There are a number of things that can influence water temperature, with air temperature being one of the most obvious. In the mountains, air temperature and consequently, water temperature can vary significantly by elevation. For instance, a river at 2000’ elevation may see an air temperature of 85-degrees in July with a water temperature of 68-degrees. But if you go to a stream at 3800’ elevation on that same July day, you may find an air temperature of 75-degrees and a water temperature of 61-degrees. That’s why I typically like to focus on high elevation streams in the middle of the summer.

Of course, the opposite is true early in the season. The high elevation streams may be too cold while the low elevation streams are starting to turn on. I once guided a local gentleman on a high elevation stream in July and we had a very productive day. He called me, frustrated, the following March. He said he’d just been to the same stream I took him to, did everything the same way, but didn’t even get a strike. In July, the water temperature had been 60-degrees on that stream. When he went back in early March, it had been closer to 40-degrees. It matters.

Tree canopy can also have a big impact on water temperature. A bigger, more open river may not be very productive on a late June afternoon. But a smaller, more heavily canopied stream at the exact same elevation might be very productive. It seems pretty obvious when you think about it, but the more direct sunlight that reaches a stream, the warmer the water is going to get.

Time of day is another big factor. A lot of people think you have to be on the water at the crack of dawn to catch fish, which is only sometimes true when you’re talking about stream trout. In the heat of the summer, very early and very late in the day are probably the times when you’ll find the most active fish, because you’re getting slightly cooler water temperatures. However, if you’re fishing in early March or late November, you’ll likely find more active fish in the middle of the day, when water temperatures are slightly warmer. That’s one of the reasons why our peak fishing seasons are in months like May or October. The temperatures are mild pretty much all day, and the fish are active pretty much all day.

This is all very specific to free flowing streams. Tailwaters are totally different animals all together. When a river is dammed to form a lake, they release water from the dam every day to control flooding and to generate electricity. The river that is formed below the dam from these releases is referred to as a tailwater.

Many rivers below large dams maintain nearly constant water temperature all year

The water that they pull from the lake to form the tailwater comes from near the bottom of the lake. Because that water is so deep, it receives no sunlight and is basically insulated by all the water above it. So, the water that comes out of the dam is approximately 50-degrees, regardless of time of day, time of year, or air temperature, which is why that big, wide-open river can support trout. Spring Creeks are very similar because the water source is deep underground, insulated by earth.

How deep the lake is determines how much cold water “storage” it has. That and the volume and frequency of water releases determine how far down river the water stays cold. Your typical East Tennessee tailwater will maintain these temperatures, and support trout, for about 25 miles. So when it comes to tailwaters, you’re always going to have about the same water temperature, making them year round fisheries. With tailwaters, it’s mostly the timing and duration of the water releases that determine when, or even if you can go and how much success you’ll have.

Back to the mountains, water temperature is one of the things that I pay the most attention to when deciding when and where to fish. I’ve been doing this a long time so I just kind of know based on all of the conditions. Until you “just know,” a stream thermometer can be one the most valuable pieces of gear in your bag.

Clouser Minnow

In freshwater or salt, one of the best baitfish patterns around…. I recently went to Perdido Key, FL on vacation. Once a year, my wife and I take a beach vacation somewhere, usually with another couple. And while these trips are more about relaxation and socializing, I always try to work in at least a little fishing, sometimes with a guide. I didn’t know much about this area and never really even took time to research, so I just packed some gear and planned to figure it out when I got there.

 

On our first day, while kicked back on the beach enjoying an adult beverage, I observed a tremendous amount of feeding activity in the surf. Schools of bigger fish were ripping through schools of smaller fish, and it was happening up and down the coast as far as I could see. Looks like I wouldn’t have to do any scouting after all. All the activity I needed was right outside my back door!

 

My big problem was that I didn’t know what kind of fish were getting eaten and what kind of fish were doing the eating. Don’t you just love beach problems? My saltwater experience is just as limited as my saltwater gear, so I approached it in the exact same way I would approach an unfamiliar freshwater situation. When in doubt, go generic. It was apparent that they were feeding on some kind of baitfish. And what is the most generic, universal fly for imitating a baitfish? A Clouser Minnow.

 

The fly was originated by Bob Clouser in 1987. Bob was a fly shop owner and guide in Pennsylvania and developed the fly for smallmouth bass on the Susquehanna River. I first learned of the fly in the early 90’s and fished it regularly on the smallmouth streams of Central Kentucky. Over the decades, it has been varied in color and style, and has accounted for nearly every species of fish known. Whether freshwater or salt, the diet of nearly every big fish includes small fish. And whether freshwater or salt, most baitfish have some very common characteristics. Most have a long, slender profile, a darker back and a lighter belly, and pronounced eyes that often act as a trigger for predators.

 

Clousers are tied in almost every color combo

While there are various color combinations to better match specific baitfish, all Clouser Minnows have the above-mentioned characteristics. They also have lead eyes positioned in such a way as to allow the fly to ride hook up. And with their bucktail bodies, they retain very little water, making them feel lighter and easier to cast than most other flies their size.

While I most often use this fly for warmwater species, I’ve taken a number of tailwater trout and even the occasional large brown in the park on it. You can bet I’ll fish it more than once in late fall in the park when those big browns begin moving before and after spawn. I tie them on traditional streamer hooks for trout, on larger gape hooks for bass, and on stainless hooks for saltwater species. I’ve had success with a number of different color combinations but my “go to” colors are white and black and white and olive.

 

So the first morning I was at the beach, I got to the water at sunrise with a black and white Clouser tied to my leader. On the second cast into the first school of feeding fish, I was hooked up. The ol’ Clouser does it again and I can now add a couple of speckled sea trout and a whole lot of ladyfish to its list of victims!

Dressing For Success

One of the Easiest Ways to Catch More Trout in the Smokies….

I recently guided a husband and wife on a small brook trout stream in the Smokies. The stream, like most in the Smokies, consisted of a lot of pocket water, which meant getting closer to the fish. Both were novice fly fishers and their skills improved steadily as the day went on. As a matter of fact, their skills were about equal, but as the day progressed the wife was getting 5 or 6 strikes for every 1 strike the husband got.

 

We were moving up the stream together and they were taking turns fishing. They were fishing the same fly. And as mentioned before, their casting ability, approach, and presentation was nearly identical. What was different, you ask? The wife was wearing a drab green shirt and the husband’s shirt was bright red. Simple as that.

 

Look how this white shirt stands out

Casting can be challenging. Getting good drifts can be challenging. Figuring out what the fish are eating can be challenging. But dressing appropriately is one of the easiest things to control and can greatly improve your success on the stream.

 

Now look how well this fisherman blends in

Years ago, three seasoned fishermen from Montana walked into Little River Outfitters frustrated that they had fished two days without catching a fish. One was wearing a bright blue shirt, another was wearing a white shirt, and the other’s shirt was bright coral color. My good friend, Walter Babb, was sitting in the shop and without pulling any punches, said, “Well, those fish saw you guys get out of the car!”

When the fishermen pointed out that they wore the same clothing in Montana and caught plenty of fish, Walter went on to explain that in big western rivers, your background is the sky. Here it’s the trees and bushes.

This is a bit extreme!

You don’t have to be a fly fishing commando decked out in camouflage and twigs in your hat to catch fish in small mountain streams, but dressing in earth-tone colors does make a huge difference. Think drab greens, browns, tans, and greys when you dress for a day on the water. While bright white t-shirts and orange Tennessee ball caps may be appropriate for game day at Neyland Stadium, they are doing you no favors on the trout stream.

 

What about strike indicators? They’re bright and colorful. Don’t they spook fish? Sometimes they do, but usually for different reasons. It’s not really the bright color that spooks fish; it’s movement. These are wild trout in the Smokies and they’re right in the middle of the food chain. Any kind of movement, particularly above them, often means a kingfisher or heron is about to swoop down and eat them! The less you blend in to your background, the more pronounced your silhouette is, and the more noticeable your movements are.

The cone

All of this becomes more and more important the closer you have to get to the fish, even when you’re behind them. Trout actually have a “cone of vision” above them that even extends a little bit behind them. The closer you get and the higher up you are, the more you will be detected in that cone. So in addition to what you wear, think about how you move through the water to reduce the chances of spooking fish. Move slowly and quietly. Stay low, particularly when fishing in close quarters. See that big boulder in the stream? Don’t fish from on top of it. Stand behind it.

 

Finally, keep your false casting to a minimum. Fly lines are often brighter colors so that you can see them in order to mend and achieve good drifts. Remember, it’s not the color so much as the movement. Repeatedly false casting a fly line over a trout’s head is excessive movement in that cone of vision and will send him under a rock.

Nippers

It’s Time to Quit Using Your Teeth….

Welcome to the wonderful world of nippers! It’s probably pretty easy to figure out that the primary function of nippers (aka clippers, cutters, snips, etc.) is to cut your line. They are mostly used to trim the tag ends of monofilament after tying a knot or to cut a new piece of tippet from a spool. But as you’ll see, the right pair of nippers can perform a number of other tasks as well.

As I have described before, my beginnings in this sport were humble at best and my funds were rather limited. There was a lot I could do with $10 back then and I certainly didn’t want to waste it on nippers – not when I could just use fingernail clippers. That strategy served me well for a time, until I figured out what a lot of fishermen eventually figure out. First, fingernail clippers are made of very cheap, soft metal, and after repeatedly clipping monofilament line, they begin forming a series of nicks in the blade. It’s not long before they become completely useless. Second, when regularly exposed to water (such as every time you go fishing), they rust – quickly.

So you can constantly replace in expensive fingernail clippers or you can do what I ultimately did – drop $10 on a decent pair of nippers. They’re rustproof and will last years before the blades begin wearing out. The other benefit to a good pair of nippers is they are designed to cut line, not fingernails. What does that mean?

When working with smaller trout flies, particularly dry flies, it can be difficult to prevent the large, curved head of generic fingernail clippers from also clipping away some of the hackle. The straight, somewhat recessed blades on fly fishing nippers are designed work and cut in tight spaces. Most nippers designed for fly fishing also include another simple but highly useful feature – a small needle.

When a fly tyer finishes a fly, thread is knotted near the hook eye and coated with a thin, invisible cement. Well, in the world of fly tying, time is money and production fly tyers apply that cement quickly, often leaving an invisible layer in the hook eye. When it comes time for you to tie that fly on your line, you can’t get the tippet through the hook eye because it’s coated in glue. This happens even more frequently with hard-bodied poppers that might be dipped in paint, only it’s the paint that is coating the hook eye. The little needle on your

nippers is designed to clear that layer of cement or paint and preserve your sanity when attempting to attach a fly.

As with most any fly fishing product these days, there are seemingly endless nipper styles and features to suit your needs and tastes. Some are just shaped differently, boasting a better ergonomic design. Others are equipped with additional tools for tasks such as tying knots or sharpening hooks. And if you want to take it to the next level, check out this description of Abel’s nippers:

  • Designed, manufactured and assembled in the USA
  • Anodized 6061-T6 aluminum body construction
  • Replaceable jaws – machined out of premium grade Crucible CPM S35VN stainlesssteel, then heat treated to 58-60rc
  • Engineered to cut 7X – 100 lb mono and braid
  • Two Year limited warranty on the jaws after initial purchase
  • Pin – 316 stainless steelAnd they can be yours in black for a mere $85. For custom colors, they’re just $105. And with a cool fish print… a steal at $165. Yep, $165 for line cutters. All of a sudden, $10 for a pair of nippers doesn’t sound too bad, does it? As with anything else, if you have the disposable income and want to spend $165 of it on nippers, go ahead. I won’t judge you.