Posted on

Flies: Soft Hackle Wired Caddis

Caddis have always seemed to be one of the most overlooked and under-imitated aquatic insects in the fly fishing world.  Maybe it’s because they haven’t been written about nearly as much as their sexier mayfly cousins over the years.  I mean, mayflies are given names like Pale Morning Dun, Quill Gordon, and Gray Fox… just to name a few.  Caddis are given names like Green Caddis, Brown Caddis, Black Caddis…

Caddis Larva

Regardless of the lack of respect given to caddis over the years, they have always been and continue to be abundant in nearly every body of freshwater and a staple in the diet of trout everywhere.  I have numerous caddis patterns that I fish seasonally in the Smokies, but one that finds its way into the line-up more than any other is the Soft Hackle Wired Caddis.

There have been a number of wire body caddis patterns over the years and this is simply my variation on similar recipes.  I sometimes tie it without a bead, but most often with a black tungsten bead at the head. It fishes well on a dead drift under a strike indicator but, especially when caddis are emerging, can be very effective fished with a drift and swing method.  Learn more about this method and other similar techniques in this article on Active Nymphing.

Soft Hackle Wired Caddis

Hook: #18 – 12 TMC 2457 (or equivalent)
Bead: Black tungsten to match hook size
Body: Small chartreuse wire*
Back: Peacock herl woven between wire wraps
Thorax: Black or brown Wapsi Life Cycle dubbing*
Hackle: Black or brown hen*

*Other colors can be substituted to match specific caddis species

Posted on

Flies: Tellico Nymph

My friend Walter Babb said that most people’s favorite fly is the fly they happened to have on the first day the fishing was really good.  The implication of his statement is that more often than not, it’s the archer, not the arrow.  Most of the time, if your fly is presented well and the fish are feeding, it probably doesn’t matter what fly you have on.  And if the fish aren’t feeding?  It probably doesn’t matter what fly you have on!

But since you happened to have that fly on the first day the fishing was good, you have confidence in it.  Now it’s the first fly you put on and you leave it on longer.  I have countless fly patterns that I abandoned because they didn’t catch fish the first time I tried them, but often that first time was after I tried everything else.  Nothing was working that day!

With all of that said, I have, by far, caught more big brown trout in the Smokies on a Tellico Nymph than any other fly.  But, you guessed it… the first big brown trout I caught in the Smokies was on a Tellico Nymph.  I have confidence in it.  And since most of the big browns I’ve taken over the years were either spotted first or caught during “favorable brown trout conditions,” I’d put a Tellico on in anticipation.  So, it’s a bit deceiving.  Who is to say I wouldn’t have caught those fish on a Prince Nymph had I chosen to tie one on?

Nevertheless, the Tellico Nymph is a good fly and it’s been around a long time.  Its exact origins are unclear, though it was thought to have, obviously, been initially created and fished on the Tellico River in East Tennessee.  It has definitely been around since the 1940’s, but some estimate that it may date back to the turn of the 20thcentury.  In any case, it has to be the most well known fly from this region and it has accounted for fish all over the world.

In addition to its origin, there seems to be some confusion as to what the fly was originally supposed to imitate.  Many contend that it represents a caddis larva.  Others are just as certain it is supposed to be a mayfly nymph.  To me, there is absolutely no doubt that it was intended to represent a golden stonefly nymph.  The coloration and size are consistent with that of a golden stone, and the Tellico River has long been known for its abundance of these nymphs.

As with any popular fly that has been around for this long, there have been a number of variations on the pattern over the years.  My personal favorite was devised by East Tennessee fly tyer, Rick Blackburn. I tie most in size #10.

Blackburn’s Tellico

Hook: 3XL nymph hook #12 – 6
Thread: Dark brown 6/0
Weight: .015 to .035 lead wire (depending on hook size)
Tail: Mink fibers (I often use moose as a substitute)
Rib: Gold wire and 2-3 strands of peacock herl
Wing Case: Section of turkey tail – lacquered
Body: Wapsi Stonefly Gold Life Cycle dubbing
Hackle: Brown Chinese neck hackle, palmered through thorax

Posted on

Spotting Fish

A 14″ rainbow feeding in flat, shallow water

In some fly fishing scenarios, spotting fish is absolutely critical for success.  Fishing the saltwater flats for bonefish, redfish, tarpon, etc. or the freshwater mud flats for carp will provide little more than casting practice if you can’t see the fish.  In other scenarios, such as fishing a mountain trout stream, you can tell where fish should be by reading the water, and you can catch a lot of fish just by fishing likely spots.  But even when fishing trout streams, the ability to spot fish in the water can sometimes allow you to locate and target larger fish.  In the fall, this is particularly relevant in the Smokies as large brown trout begin moving into flatter, shallower water preparing to spawn.

Spotting fish can be difficult to learn and there is no substitute for years of experience and practice, but there are a few things that can help you get started.  The best place to start is with a pair of polarized sunglasses and this article will help a little when choosing a pair.  The next thing to understand is how trout see, because as you seek out vantage points from which to spot fish, you want to avoid spooking the fish in the process.  Here is an article on trout behavior that goes into a little more detail. Now we’re ready to go spot some fish.

Start by looking for fish in slower water.  The more broken the surface is, the more difficult it will be to see through it. If possible, try to find a higher vantage point from which to look.  This will greatly reduce the amount of light refraction from the water’s surface.  Just remember that the higher up you get, the easier it will be for fish to pick up your movement.  Avoid standing erect on a large boulder, as your silhouette will be far more pronounced.  A high bank with a wooded backdrop is ideal, but you’ll still want to keep your movements slow and minimal.  If you are on a large rock above a pool, get on your belly and peek over the edge. Remember the old westerns where the Indians were looking off the rocky bluffs about to attack the wagon train? That’s the idea.

Now that you’re in position, take your time.  It’s extremely rare that you’re going to step up to a pool and immediately see a 27” brown trout.  You have to methodically scan the pool.  Start by reading the water and looking for fish where they should be.  Look for obvious feeding areas in and around current lanes and foam lines.  Look for areas with obvious cover under and around big rocks and/or fallen trees.  They blend in REALLY well, so look long and hard and train your eye to look through the water rather than at it.

It’s hard.  You’ll spot plenty of fish that turn out to be rocks or pieces of wood.  I once spent 15 minutes casting to a plastic grocery bag hung on an underwater limb. It had the exact shape and movement of a trout!  I was in the water and my buddy was above me, watching from a bridge.  We were both certain it was a fish!

There are four trout in this photo. Can you see them?

Movement and shape really are the best giveaways and that’s why it’s so important to take your time and give long looks to those likely spots.  You may not see anything at first, then you see a little movement and suddenly the fish is visible.  And once you spot one, you often begin to notice others around him.  Watching the actual stream bottom, especially on sunnier days, can be helpful too.  The movement that you often detect is the shadow of the fish.

Another thing to look for is a flash near the stream bottom.  The eyes of a trout are positioned in such a way that they look slightly upward.  When feeding on nymphs on the bottom, the trout has to angle his body to see below and will often “twist” his body when he eats the nymph.  When this occurs, his white belly reflects light and produces a flash.  This is always helpful when looking for fish, but especially in faster water.

All of this is easier the more familiar you are with the stream bottom.  If you have a favorite pool, maybe one where you spooked a big fish before, keep going back there and looking.  You will inevitably begin memorizing the stream bottom and will more quickly and easily be able to differentiate between rocks and fish. Again, it’s not easy and it takes time but like most things, the more you practice, the better you’ll get.

So, you’re starting to spot some fish… now what?  Don’t just jump in and start casting the second you see a nice one.  Keep watching.  What is the fish doing?  If you see a big fish just hugging the bottom, he’s not feeding and you’re wasting your time casting to him.  But good news… you found a big fish.  You might come back closer to dawn or dusk when he is more likely to be feeding.

This 22″ brown was spotted and observed for nearly 15 minutes before approach

If you spot a fish up in the water column, he’s likely feeding.  Keep watching him.  Is he looking up?  Does he consistently feed to his right?  Is he staying in one place or is he systematically rotating to different locations within the pool?  Pay attention to all of these things and then you can plan your attack.  Sometimes with big fish, you’re only going to get one shot and you want to make it count.

How much time you spend looking depends on you.  I know guys that do little more than target big brown trout, and they spend far more time watching water than they do fishing.  For me, it depends on where I’m fishing and the conditions.  If I’m fishing pocket water on a high country brook trout stream, I’m not going to spend much time, if any, looking for big fish. I’m going to cover a lot of water and hit the likely spots.  If I’m fishing a big pool on a brown trout river, I’m going to spend at least a few minutes looking before I jump in.  If I’m fishing that same big pool in late fall, I’m going to look a lot more thoroughly!

Posted on

Flies: Egan’s Headstand

From the creative fly tying mind of Lance Egan comes one of my favorite carp flies of all time.  I’m not too sure what it’s supposed to imitate but for me, that’s true of many carp patterns.  Most likely it represents a small crayfish… possibly a dragonfly nymph.

The bead chain eyes give it the perfect amount of weight to get down quickly to carp feeding on a shallow flat without the loud splash of lead.  And when the eyes are positioned correctly, it rides hook up, preventing bottom snags.

Present it by leading the carp slightly and retrieve it very slowly into carp’s path.  The take will be subtle.  Watch for the turn of the carp’s head, set the hook, and hang on!

Egan’s Headstand

Hook: TMC 2457 #8
Thread: 6/0 Black
Tail: Red fox squirrel tail
Body: Medium to dark brown dubbing
Hackle: Brown rooster, palmered
Rib: Fine copper wire
Throat: Peacock sword
Legs: Sili-legs pumpkin – orange – black
Head: Bright orange dubbing
Eyes: Medium silver bead chain, positioned just behind the eye.

Posted on

How Stuff Works: Fly Boxes

I’m a bit of an oddball. This is not exactly breaking news for most folks who know me.  But to paraphrase John Gierach, “If, from time to time, people don’t walk away from you shaking their head… You’re doing something wrong.”  I could certainly dedicate an entire article, or even a book, to my oddball qualities, but for this article, I am referring to one specific oddball quality.  I fish and guide with a set-up that combines a pack and fly boxes all in one contraption. You’ve seen it.  It’s my chest fly box, custom built by the Richardson Chest Fly Box Company in Pennsylvania.  It’s awesome and I love it.

Chest Fly Box

So, that makes it a little more challenging for me to give advice on individual fly boxes.  But I have over the years used about every kind of box and pack known to man.  And along the way I have learned a few things that may be helpful to you when purchasing or organizing your flies.  At the least, it might get you thinking about it.  And who knows?  Maybe one day you’ll come to your senses and buy a Richardson!

While chest fly boxes like mine are more common in the Northeast, they are hardly common.  Most folks go a different route.  They have a variety of different fly boxes that they stuff in a vest, hip pack, chest pack, sling bag, or some other carryall.  No matter how you decide to carry them, fly boxes are essential organizational tools in our sport and it helps to know a few things about them.

Medium Box with Foam

They come in a number of different sizes, from large, briefcase size boxes for boats to ultra slim boxes not much bigger than a smartphone.  When choosing a fly box size, you have to consider how many flies you need to carry, how you’re going to carry them, how big the flies are, and how you want to organize them.  For instance, a big, briefcase size box may hold every fly you have but it won’t be very portable when wading creeks.  Or a small, ultra slim box might be convenient to slip in a pocket, but if you plan to store bass bugs in it, you’ll only be able to carry a couple and you won’t be able to close the lid.

In addition, you’ll have to consider how you want to organize your flies within your box. There are countless options for securing your flies from slot foam, flat foam, and nubby foam to compartments, clips, and magnets.  Some boxes might even have a combination of both, with a type of foam on one side of the box and compartments on the other.  Certainly personal preference plays a big role in you box interior of choice, but there are practical matters to consider as well.

Compartment Box

Compartments tend to lend themselves well to beefier patterns, or large quantities of the same fly. For instance, if you fish a lot of Pheasant Tails and carry a lot of them with you, it’s far easier to dump them all into one compartment rather than trying to line up three dozen Pheasant Tails across multiple rows of foam.  I find foam more useful when I am trying to organize a lot of different patterns but small quantities of each.  It’s easier to see what I have.

Ultra Thin Magnetic Compartments

The type of fly may also determine the best way to store it.  Thin foam or magnetic boxes can be great for midges and nymphs but can crush the hackles on many dry flies.  On the other hand, trying to carry midges in deep compartments can not only be a waste of space, it can be difficult to grasp them with your fingers when removing them from the box.

Finally, when you’re on the stream, you don’t want to spend your time hunting for flies or digging through your pack for fly boxes.  Try to have a designated area of your pack or vest for boxes rather than burying them under a rain jacket somewhere.  And if you carry five fly boxes on the stream, try to make them five different, or at least different looking, fly boxes.  This will save you all kinds of time when trying to locate a specific box of flies.

Posted on

Flies: Humphreys’ Caddis Pupa

Few fly fishermen, if any, possess the knowledge and experience of Joe Humphreys.  Joe is probably best known as a teacher and an author, but over his many decades in the business, he has also created a number of original fly patterns.  By far, my favorite is the Humphreys’ Caddis Pupa.

Natural Caddis Pupa

To be honest though, I’ve always been a little perplexed  by the pattern.  To me it bears little resemblance to a natural caddis pupa and doesn’t look like any imitation that I’ve seen or that I would create.  In his book, “On the Trout Stream,” the only explanation Joe provides is “A good firsthand look at a caddis pupa prompted this tie.”  Apparently Joe saw something in a caddis pupa that nobody else did, because his unique pattern has proven to be one of the most effective I’ve ever fished!

The body color can be varied to match caddis in a specific stream.  I tie them often in olive and cream, but in the Smokies, most frequently find success with tan bodies.  Some species of caddis hatches in the Smokies nearly anytime of year but the heaviest hatches tend to occur in spring.

It works best on any stretch of stream with more of a cobble or even sandy bottom.  I frequently fish it as a dropper off a Neversink Caddis or in a tandem nymph rig below a soft hackle.

Humphreys’ Caddis Pupa

Hook: TMC 3761 or equivalent #18 – 12
Thread: Brown 8/0
Weight: Lead wire to match hook size
Butt: Peacock Herl
Body: Natural Hare’s Ear Dubbing (substitute other colors to match naturals)
Hackle: Dark Brown Saddle
Head: Peacock Herl

Posted on

Flies: Rob’s Flash Wing Pheasant Tail

Fly Tying is a lot like cooking in many ways.  Of course, in both pursuits, you’re combining a variety of ingredients to create one final product.  And the quality of those ingredients along with the skills of the person putting them together can tremendously impact the end result.  But the issue of originality is also quite comparable.

What constitutes an original recipe rather than simply a variation on an old standard is a very fine line.  If you cook ground beef and put it on a bun with some cheese, it’s a cheeseburger.  If you add sautéed onions, it’s a cheeseburger with sautéed onions.  But if you use a different type of bread, it becomes a Patty Melt.  Fly patterns have the same blurred lines of originality.

The pattern featured here is of my own design but I didn’t give it a very original name because, in my opinion, it’s really just a variation of a classic nymph pattern that the world already knows as a Pheasant Tail Nymph. My version here has a substitution for one material and the addition of two more materials.  Is that enough to be considered totally original and warrant a brand new name?  Maybe, but I didn’t think so.

In any case, it is a nymph I have been tying and fishing for about five years and it has become one of my favorite flies and most consistent nymph patterns.  Like the original Pheasant Tail Nymph, it doesn’t specifically imitate one nymph.  Rather, it’s dark and buggy and is suggestive of many mayfly nymphs and caddis larvae.  The addition of rubber legs gives it a little more movement in the water, and the Ice Dub thorax and Krystal Flash wing provide a little more flash.  I’m always wary of having too much flash on my flies, particularly when fishing for wild trout, but this seems to have just enough to add a little more life to the pattern without sending the fish running for cover.

Rob’s Flash Wing Pheasant Tail

Hook: TMC 2457 or equivalent, #18 – #12
Thread: 8/0 Brown
Weight: Black tungsten bead sized to match hook
Tail: Pheasant tail fibers
Abdomen: Pheasant tail fibers
Rib: Fine copper wire
Wing: 4-6 strands of pearlescent Krystal Flash
Thorax: Peacock Ice Dub
Legs: Black micro rubber legs

Posted on

Flies: March Browns

So, I’m writing about March Browns not because they are necessarily of great significance to the Smoky Mountain fly fisherman, but mainly because they’re just really cool bugs! Like many aquatic insects in the Smokies, this mayfly does not usually hatch abundantly enough to really get the trout keyed in on them, but it is worth keeping a few in your fly box. In other words, you probably don’t need fifteen different March Brown patterns in subtly different colors. Having a few of a basic pattern should do the trick.

March Brown Dry Fly

March Browns are big, usually a #12 or #10 hook size, and they tend to be the first mayfly of the year with any color. Most of your early spring mayflies are some version of grey, but March Browns usually have a light, reddish brown body with handsomely mottled wings of brown, tan and even yellow hues. Contrary to what their name might imply, these mayflies don’t hatch in March. Rather, they tend to show up, at least in the Smokies, around the third week of April and hang around for the first half of May.

March Brown Nymph

The nymphs are probably the most important stage for Smoky Mountain fishermen. While they have flat clingy bodies with muscular legs, making them very strong crawlers, when they lose their footing, they are terrible swimmers and easy pickins for a waiting trout. The nymphs tend to inhabit moderate to fast riffles and vary in color from tan to reddish brown to dark brown. A Hare’s Ear Nymph or Pheasant Tail Nymph are good generic imitations. I’ve also included one of my favorite patterns designed to specifically imitate a March Brown nymph.

Nymphing these patterns should be fairly effective all day but particularly early in the morning. Expect to see the adults hatching from late morning to early afternoon with a spinner fall near dusk.

Learn more about Smoky Mountain hatches and flies in my hatch guide.

March Brown Dry
Hook: #12 – #10 TMC 100 or equivalent
Thread: Brown 8/0
Tail: Brown hackle fibers
Body: Reddish tan dubbing (many companies sell a color called March Brown)
Wing: Wood Duck
Hackle: Brown and Grizzly

March Brown Nymph
Hook: #12 TMC 3761 or equivalent
Thread: Brown 8/0
Tail: Moose fibers
Abdomen: Rusty red floss
Rib: Stripped peacock stem
Wincase: Lacquered turkey
Thorax: Peacock herl
Legs: Brown hackle

Posted on

Matching the Hatch

Probably 20 years ago, I was fishing the Clinch River with a buddy during the sulfur hatch. I won’t get into what has happened to that hatch, but back then, it was epic. Sulfurs would come off by the thousands for 4-6 hours a day for about 3 months. We would drive down from Kentucky to fish it and on most trips, we would both steadily catch fish, many topping 20”.

On this particular trip, the bugs were coming off as good as they ever had, the water was boiling with rises, but we were both getting blanked! We were both going through every type of sulfur dry, emerger, and nymph in the box, all with the same result. Frustration got the best of both of us and we headed to the bank for a smoke, a bad habit we both enjoyed back then. While staring at the river and scratching our heads, it hit us both at the same time as we simultaneously exclaimed, “They’re eating caddis!”

Caddisflies tend to emerge quickly and almost explode off the water. When a trout feeds on one, it will frequently chase it to the top to eat it before it gets away. Sometimes the momentum will cause the fish to come completely out of the water, but at the least, results in a very distinct, splashy rise – not like the delicate sipping rise to a mayfly. Once we stepped away from the river and watched, we both noticed it.

We went back to the water and began looking more closely. Sure enough, there were caddis hatching, too. There was probably one caddis hatching for every 100 sulfurs, but for whatever reason, the trout were keyed in on the caddis. It’s what is referred to as a “masking hatch.” We both switched to the appropriate caddis pattern and were immediately into fish!

That’s not the only time something like that has happened, and each occurrence has trained me to always pay attention and sometimes try to look past the obvious. Here are a few things I’ve learned along the way that may help you solve a hatch riddle sometime.

First, we have to address the basics. If you see fish rising and have a pretty good idea what they’re eating but you’re fly is being ignored, check to see that your fly is the same size as the naturals. Also be certain that your tippet is not too large and that you’re getting a good drift. Presentation is most often the culprit when your fly is being ignored. Next, make certain that the color is a close match to the natural. If you’re fishing a bushy pattern, you might try a more subtle pattern like a Comparadun. If that’s not working, try an emerger fished just under the surface or in the film.

Fish Rise

Still not catching them? Take a break and watch the water. You may be able to tell something from the rise rings as I described above. If you don’t learn anything from that, try to find a fish that is rising steadily and watch him. He’s probably feeding in rhythm, like every 10 seconds. Watch his spot and try to time his rises. When you have that down pretty close, try to see what he eats. You should be able to tell if it’s the same kind of bug you’re seeing in the air, or at the very least, whether he’s eating something on or just below the surface. It’s almost like detective work. You sometimes have to go through the process of eliminating suspects before you can zero in on your man!

If fish are actively rising but you don’t see any bugs in the air, check the water. Try to position yourself at the bottom of a feeding lane (downstream of where the fish are feeding) and watch the surface of the water (and just beneath) for drifting bugs. Holding a fine mesh net in the current is a great way to collect what’s coming down the channel, but if you don’t have one, your eyeballs will do just fine. If you see some insects, capture one and try to match it with a fly pattern.

Hatches are puzzles and that’s one of the things that makes them fun. Sometimes you solve it right away, sometimes it takes awhile. Just remember that while the fly pattern is a big part of the equation, it’s not the only one. As mentioned above, presentation is huge. In addition to your technique, a smaller tippet and/or a longer overall leader may be the solution. Also consider your approach.

While I typically like to cast upstream to fish so that I can stay behind them, they will sometimes shy away from your fly in slow runs if they see your line or leader. I will sometimes try to get above fish in slow runs and cast down to them so they are sure to see the fly first. You have to land your cast short of them with slack in the line, and feed slack to enable the fly to naturally drift to them. This is a challenging presentation and it is critical that you carefully position yourself out of the trout’s line of vision.
Again, it’s a puzzle and there’s not one universal solution to every challenge.

Pay attention to your technique and everything what you’re doing (or not doing). Most important, pay attention to the fish. They’ll usually tell you what to do!

Learn more about Smoky Mountain hatches and flies in my hatch guide.

Posted on

Setting the Hook

If you’ve ever spent anytime fishing in the Smokies, you have missed plenty of strikes. And if you’ve ever been fishing with me in the Smokies, you’ve no doubt heard me say that no matter how good you are and how often you fish, you’re going to miss strikes from these fish. I’d say that’s true most anywhere, but in the Smokies, it’s a guarantee. I’ve had the pleasure of fishing for trout all over the United States and I am yet to find trout anywhere that hit and spit a fly quicker than they do in the Smokies! But while nobody is going to hook them all, there are plenty of things you can do to increase the number of fish you hook.

Before we get into those things, let’s first talk about what exactly is going on when a trout hits your fly. I once guided a gentleman who was having an excellent day as far as activity goes, but he was missing A LOT of strikes. I was giving him plenty of tips along the way but midway through the day, I realized we just weren’t on the same page when, after missing another strike, he commented, “I don’t know how trout even survive.”

“What do you mean,” I asked.

He replied, “It seems like it would be hard for them to survive when they miss their food so often.”

I asked more emphatically this time, “What are you talking about?!?”

He said, “As often as they miss the fly, you know they’ve got to be missing the real food, too.”

I exclaimed, “They’re not missing. You are!”

Don’t get me wrong. I have missed plenty of strikes in my years of fly fishing. Like I said, we all do, but it’s always been my fault, not the trout’s! Sure, every now and then a fish will “short strike” the fly or bump it with his nose, but for most anglers, that is very much the exception.  Even when that is the case, it’s probably still your fault. If you’re getting short strikes, it’s probably because your fly is too big, or your tippet is too big, or you have drag… Again, all of those things happen to everyone, but blaming the fish will never fix any of them!

So, what actually happens when a fish hits your fly? It depends on the kind of fly you’re fishing. When you are fishing a streamer (a fly that imitates a baitfish or something else that swims), you are usually stripping it and keeping a tight line. Typically, the trout will chase and/or ambush something they think is a wounded or fleeing baitfish. The strike will usually be rather aggressive and because you have a tight line, you will feel the strike. When you’re swinging wet flies or straight-line nymphing, you usually feel the strike as well, but it’s usually more subtle than the often violent strike that comes on a streamer.

But most of the time on a trout stream, most fly fishermen are imitating aquatic insects that are drifting in the water column. Whether adults on the surface or nymphs below the surface, these bugs are drifting helplessly in the current. When trout feed on these natural insects, it’s not necessary or efficient for them to swim around ambushing them. Rather, a trout will position facing a current, where the insects will drift down his feeding lane. All he has to do is maneuver slightly up, down, or to the side to pick them off.   When a trout feeds in this manner, he’s more or less just moving in front of the bug and opening his mouth.

But there are a lot of things coming down the current and some of them, like small twigs or leaves, may look like an insect to a trout. When he takes one of these foreign objects by mistake, he immediately spits it back out. It’s what a trout does all day. Real bug = swallow, stream junk that looks like a bug = spit it out. When you drift an artificial fly down the current and the trout hits it, he immediately spits it out because it’s not real. So you have that split second between when he eats it and when he spits it to set the hook.

Wild trout, like in the Smokies, are highly instinctive and tend to make this decision pretty quickly. Stocked trout were raised in hatcheries where they were fed daily. They tend to “trust” food a little more and consequently, will hold on to a foreign object (like your fly) a little longer before spitting it out. For that reason, fishermen tend to have a better strike to hook-up ratio on stocked trout vs. wild trout.

In either case, you are rarely going to feel the strike in these scenarios. To avoid drag and present the fly naturally, you will have to have some slack in your line and the fish doesn’t have the fly long enough to tighten your line enough for you to feel it. You will need to visually recognize the strike to tell you when to set the hook. With a dry fly, it’s fairly obvious because the fish will have to break the surface to eat your fly. As soon as you see that, set the hook. It is incredibly difficult in most situations to see a fish eat your nymph, so we often use a strike indicator positioned on the leader. When the fish eats the nymph, it will move the indicator, providing your visual cue to set the hook.

Now, with all of this in mind, here are some tips that may help you connect on a few more fish, particularly when dead-drifting dry flies and nymphs.

 

  • Know that you will probably not feel the strike and trust the visual indication of the strike. Even when streamer fishing when you DO normally feel the strike, there are times when the fish hits between strips when the line is slack. You may not feel it but you’ll see the fly line dart forward. Trust what you see!
  • Expect a strike every time the fly is on the water and be ready. As silly as it sounds, many strikes are missed because the fisherman just isn’t paying attention. Stay focused on what you’re doing. Don’t look at the bird overhead. Don’t look at the next pool up the river. Don’t stand there with your hand on your hip. Be ready!
  • Similar to #2, pay attention to your slack. The cast isn’t when your job ends – it’s when it starts. Particularly when fishing upstream, be prepared to immediately begin collecting excess slack as it drifts back to you. Many fishermen think that they’re missing strikes because they’re too slow when, in fact, their reaction time is fine but they have too much slack to pick up to tighten on the fish. Leave just enough slack to achieve a good drift but no more.
  • Keep your casts as short as possible. Not only will you be more accurate and probably get more strikes, but you’ll have less line to move when setting the hook. In some situations, like slow pools, we are forced to make long casts, but fish from better, closer positions when possible.
  • Move the line. Your hook set should be like making a quick backcast. In other words, if you miss the strike, the line should go in the air behind you like a backcast. If you miss a strike and all of your line is still on the water in front of you, you didn’t move enough line to set the hook.
  • Your hook set should be quick but smooth, and when possible, in an upward motion. A snappy or jerky hook set is a good way to break a tippet. A downward hook setting motion has a tendency to pull the fly out of the fish’s mouth, rather than up through the lip.

Setting the hook is also very much a timing thing. The more time you spend on the water, the better your timing will be and you may find that you sometimes even anticipate the strike just before it happens. And you may find that you have to adjust the timing of your hook set on different rivers. For instance, you may need to slow down a little when fishing for stockers or you may have to speed up a little when fishing for wild trout.

In either case, you’re still going to miss some and that’s okay. As far as fishing problems go, missing strikes is a pretty good one. To miss strikes you have to get strikes. And if you’re getting strikes, you’re doing something right!